BS EN ISO 18563-3:2015介绍了采用线性相控阵探头的超声波检测系统，具体如下: 接触（带或不带楔块）或浸没，中心频率在0.5 MHz-10 MHz范围内。它提供了验证设备性能的综合验收标准 （即连接的仪器、探头和电缆）。所描述的方法适用于正在工作的用户 在现场或车间条件下。其目的是验证机器的正确操作 系统测试前，还要对声束进行表征或验证是否存在缺陷 系统退化。这些方法不是为了证明系统对特定应用的适用性，而是 旨在证明组合设备根据以下要求产生超声波束的能力: 使用的设置。针对特定应用的系统校准不在ISO 18563部分的范围内，并且 旨在将其包含在试验程序中。ISO 18563的本部分不涉及以下内容:环绕阵列；具有不同数量元素的孔系列；发射和接收的不同设置（例如活动孔径、活动元件数量、， 延误）；以更复杂的方式对单个元件的信号进行后处理的技术 而不是简单的延迟定律（例如。 完整矩阵捕获）。交叉引用:ISO 5577ISO 18563-1EN 1330-4EN 16018EN 16392-2ISO 2400 ISO 7963ISO 19675EN 12668-2购买本文件时提供的所有现行修订版均包含在购买本文件中。

BS EN ISO 18563-3:2015 addresses ultrasonic test systems implementing linear phased array probes, in contact (with or without wedge) or in immersion, with centre frequencies in the range of 0,5 MHz-10 MHz.It provides methods and acceptance criteria for verifying the performance of combined equipment (i.e. instrument, probe and cables connected). The methods described are suitable for users working under on-site or shop floor conditions. Its purpose is for the verification of the correct operation of the system prior to testing, and also the characterization of sound beams or verification of the absence of degradation of the system.The methods are not intended to prove the suitability of the system for particular applications, but are intended to prove the capability of the combined equipment to generate ultrasonic beams according to the settings used.The calibration of the system for a specific application is outside of the scope of part of ISO 18563 and it is intended that it be covered by the test procedure.This part of ISO 18563 does not address the following:encircling arrays;series of apertures having a different number of elements;different settings for transmitting and receiving (e.g. active aperture, number of active elements, delays);techniques using post-processing of the signals of individual elements in a more complex manner than a simple delay law (e.g. full matrix capture).Cross References:ISO 5577ISO 18563-1EN 1330-4EN 16018EN 16392-2ISO 2400ISO 7963ISO 19675EN 12668-2All current amendments available at time of purchase are included with the purchase of this document.