首页 馆藏资源 标准快讯 标准数字化 呈缴征集 标准服务 关于我们
作废 ASTM D5409/D5409M-93(2010)e1
到馆提醒
收藏跟踪
购买正版
Standard Guide for Set of Data Elements to Describe a Groundwater Site; Part Two<char: emdash>Physical Descriptors (Withdrawn 2019) 描述地下水现场的一组数据元素的标准指南;第二部分<char:emdash>物理描述符(2019年撤销)
发布日期: 2010-08-01
废止日期: 2019-01-09
1.1本指南涵盖了与实践结合使用的三个指南中的第二部分 D5254 这描述了描述地下水数据收集或采样点所需的数据。本指南确定了现场的物理描述符,如施工和地质元素。第一部分(指南 D5408 )描述了可能指定用于识别任何单个地下水场地的最小数据元素集之外的其他信息,而第三部分则确定了单个地下水场地的使用描述符,如监测。 笔记 1-地下水现场是指能够从地表以下的自然地层中产生水或水文数据的任何来源、位置或采样站。水源或设施可以包括井、泉水或渗漏、排水沟或隧道(方向接近水平)。其他来源,如挖掘、驱动装置、钻孔、池塘、湖泊和天坑,可以证明与地下水水力连接,适合预期用途。 笔记 2-第一部分(指南 D5408 )包括数据可信度分类描述符(一个元素)、地理位置描述符(四个元素)、政治体制描述符(一个元素)、源标识符描述符(四个元素)、法律描述符(九个元素)、所有者描述符(两个元素)、现场访问描述符(三个元素)、其他识别描述符(两个元素),其他数据描述符(三个元素)和备注描述符(三个元素)。第三部分(指南 D5410 )包括监测描述符(77个数据元素)、灌溉描述符(四个数据元素)、废物场地描述符(九个数据元素)和退役描述符(八个数据元素)。有关本指南中的描述符列表,请参阅第3节。 1.2地下水水文学家使用的术语描述了这些数据元素。标准参考文献,如地质学术语表 (1) 和各种水文地质学专业出版物,用于确定这些定义。 许多建议的要素及其代表性代码是由美国地质调查局水资源司建立的,并用于国家水信息系统计算机化数据库 (1-19) . 笔记 3-本指南的目的是建议可为地下水现场收集的数据元素。这并不是唯一意味着计算机数据库,而是用于输入任何类型的永久文件的数据元素。 笔记 4-组件和代码列表与一些数据元素一起给出,例如 “ 弹簧类型, ” 这些只是建议。这些清单可以根据维护地下水数据文件的公司或机构的意图进行修改、扩展或缩减。 笔记 5-本指南中商品名的使用仅用于识别目的,不构成ASTM的认可。 1.3本指南包括记录地下水现场所需的数据元素,这些数据元素超出了 “ 最小数据元素集。 ” 数据元素的一些示例包括井深、含水层和泉水的永久性。没有一个站点需要每个数据元素,例如,Spring不需要井深和套管数据。站点的每个记录(一组相关数据元素)都有强制性数据元素,例如电梯记录的电梯类型。然而,只有在为现场收集特定记录时,才认为这些要素是必要的。 1.4以国际单位制或英寸-磅单位[括号内]表示的数值应单独视为标准值。每个系统中规定的值可能不是精确的等效值;因此,每个系统应相互独立使用。将两个系统的值合并可能会导致不符合标准。 1.4.1处理英寸磅单位时,使用英寸磅单位的重力系统。在这个系统中,磅(lbf)表示力(重量)的单位,而质量的单位是段塞。 除非涉及动态(F=ma)计算,否则未给出合理化的段塞单元。 1.5 本标准并非旨在解决与其使用相关的所有安全问题(如有)。本标准的用户有责任在使用前制定适当的安全和健康实践,并确定监管限制的适用性。 1.6 本指南提供了有组织的信息收集或一系列选项,并不推荐具体的行动方案。本文件不能取代教育或经验,应与专业判断一起使用。并非本指南的所有方面都适用于所有情况。本ASTM标准不代表或取代必须根据其判断给定专业服务的充分性的谨慎标准,也不应在不考虑项目的许多独特方面的情况下应用本文件。 文字 “ 标准 ” 在本文件标题中,仅表示该文件已通过ASTM共识程序获得批准。 ====意义和用途====== 地下水现场的数据收集有多种目的。这些目的通常都需要一组特定的数据元素。例如,当地下水质量受到关注时 ‘ 最小数据元素集 ’ 现场需要,但需要有关样本采集深度间隔、采集方法以及采集日期和时间的信息,以完全确认数据。每次使用数据时,建议使用另一组元素,例如含水层特征或水位记录。通常,现场人员收集的有关现场的信息越多,就越容易了解地下水条件,并就现场得出有效的结论和解释。 本指南和指南中列出的数据元素 D5408 和 D5410 应协助规划可以为地下水现场收集哪些信息以及如何记录这些数据。 笔记 6-一些重要数据元素可能在站点存在期间发生变化。例如,由于维修或更换设备,用于测量水位的测量点的高程可能会被修改。当测量点是泵中的开口并且泵被修改或更换时,经常会发生这种情况。由于无法始终预测变化,因此最好将测量点的高度参考到附近的永久高度基准。测量点通过与高度基准相同的高度(零校正)或高于(负校正)或低于(正校正)来参考。在进入永久记录之前,应参考高度基准校正所有适当的测量值。在整个站点期间,必须注意保持这些数据元素的关系一致。 一些数据元素有一个广泛的组件列表或可能的条目。例如,6.1.8中描述的含水层识别列表有5000多个条目。本指南中不包括可能条目的冗长列表,但是,有关从何处获取这些组件的信息包含在特定数据元素中。 笔记 7-本指南确定了完整记录任何地下水现场信息所需的其他信息来源、列表等。
1.1 This guide covers Part Two of three guides to be used in conjunction with Practice D5254 that delineates the data desirable to describe a groundwater data collection or sampling site. This guide identifies physical descriptors, such as construction and geologic elements, for a site. Part One (Guide D5408 ) describes additional information beyond the minimum set of data elements that may be specified to identify any individual groundwater site, while Part Three identifies usage descriptors, such as monitoring, for an individual groundwater site. Note 1—A groundwater site is defined as any source, location, or sampling station capable of producing water or hydrologic data from a natural stratum from below the surface of the earth. A source or facility can include a well, spring or seep, and drain or tunnel (nearly horizontal in orientation). Other sources, such as excavations, driven devices, bore holes, ponds, lakes, and sinkholes, that can be shown to be hydraulically connected to the groundwater are appropriate for the use intended. Note 2—Part One (Guide D5408 ) includes data confidence classification descriptor (one element), geographic location descriptors (four elements), political regime descriptor (one element), source identifier descriptors (four elements), legal descriptors (nine elements), owner descriptors (two elements), site visit descriptors (three elements), other identification descriptors (two elements), other data descriptors (three elements), and remarks descriptors (three elements). Part Three (Guide D5410 ) includes monitoring descriptors (77 data elements), irrigation descriptors (four data elements), waste site descriptors (nine data elements), and decommissioning descriptors (eight data elements). For a list of descriptors in this guide, see Section 3. 1.2 These data elements are described in terms used by groundwater hydrologists. Standard references, such as the Glossary of Geology (1) and various hydrogeologic professional publications, are used to determine these definitions. Many of the suggested elements and their representative codes are those established by the Water Resources Division of the U.S. Geological Survey and used in the National Water Information Systems computerized data base (1-19) . Note 3—The purpose of this guide is to suggest data elements that can be collected for groundwater sites. This does not uniquely imply a computer data base, but rather data elements for entry into any type of permanent file. Note 4—Component and code lists given with some of the data elements, for example “ Type of Spring, ” are only suggestions. These lists can be modified, expanded, or reduced for the purpose intended by the company or agency maintaining the groundwater data file. Note 5—Use of trade names in this guide is for identification purposes only and does not constitute endorsement by ASTM. 1.3 This guide includes the data elements desirable to document a groundwater site beyond those given in the “ Minimum Set of Data Elements. ” Some examples of the data elements are well depth, contributing aquifer, and permanence of spring. No single site will need every data element, for example, springs do not need well depth and well casing data. Each record (group of related data elements) for a site has mandatory data elements, such as the type of lift for the lift record. However, these elements are considered necessary only when that specific record is gathered for the site. 1.4 The values stated in either SI units or inch-pound units [presented in brackets] are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.4.1 The gravitational system of inch-pound units is used when dealing with inch-pound units. In this system, the pound (lbf) represents a unit of force (weight), while the unit for mass is slugs. The rationalized slug unit is not given, unless dynamic (F = ma) calculations are involved. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 1.6 This guide offers an organized collection of information or a series of options and does not recommend a specific course of action. This document cannot replace education or experience and should be used in conjunction with professional judgment. Not all aspects of this guide may be applicable in all circumstances. This ASTM standard is not intended to represent or replace the standard of care by which the adequacy of a given professional service must be judged, nor should this document be applied without consideration of a project's many unique aspects. The word “ Standard ” in the title of this document means only that the document has been approved through the ASTM consensus process. ====== Significance And Use ====== Data at groundwater sites are gathered for many purposes. Each of these purposes generally requires a specific set of data elements. For example, when the groundwater quality is of concern not only are the ‘ minimum set of data elements ’ required for the site, but information concerning the sample collection depth interval, method of collection, and date and time of collection are needed to fully qualify the data. Another group of elements are recommended for each use of the data, such as aquifer characteristics or water-level records. Normally the more information that is gathered about a site by field personnel, the easier it is to understand the groundwater conditions and to reach valid conclusions and interpretations regarding the site. The data elements listed in this guide and Guides D5408 and D5410 should assist in planning what information can be gathered for a groundwater site and how to document these data. Note 6—Some important data elements may change during the existence of a site. For example, the elevation of the measuring point used for the measurement of water levels may be modified because of repair or replacement of equipment. This frequently occurs when the measuring point is an opening in the pump and the pump is modified or replaced. Because changes cannot always be anticipated, it is preferable to reference the height of the measuring point to a permanent nearby altitude datum. The measuring point is referenced by being the same altitude (zero correction) or above (negative correction) or below (plus correction) the altitude datum. All appropriate measurements should be corrected in reference to the altitude datum before entry into the permanent record. Care must be exercised to keep the relationship of these data elements consistent throughout the duration of the site. Some data elements have an extensive list of components or possible entries. For example, the aquifer identification list described in 6.1.8 has over 5000 entries. Lengthy lists of possible entries are not included in this guide, however, information on where to obtain these components is included with the specific data element. Note 7—This guide identifies other sources, lists, etc., of information required to completely document information about any groundwater site.
分类信息
关联关系
研制信息
归口单位: D18.21
相似标准/计划/法规