现行
ASTM A807/A807M-19(2025)
到馆提醒
收藏跟踪
分享链接
购买正版
选择购买版本
本服务由中国标准服务网提供
电子版
英语/个人电子版/1-2个工作日发邮件/有水印
¥ 648
更多
前往中国标准服务网获取更多购买信息
支持批量购买纸质版标准
Standard Practice for Installing Corrugated Steel Structural Plate Pipe for Sewers and Other Applications
用于下水道和其他应用安装波纹钢结构板管的标准实践
1.1
本规范主要包括按照规范生产的波纹钢结构板管、管拱、拱和地下通道的正确安装的程序、土壤和土壤放置
A761/A761M
,在沟渠或路堤安装中。本规范还包括为不涉及回填或土壤-结构相互作用的替代用途安装结构板。
1.2
典型的沟渠安装和典型的路堤(突出)安装如所示
图1和
2
,分别。如本文所述的结构板结构是以板形式在工厂制造并在现场用螺栓固定在一起以提供所需的结构形状、尺寸和长度的那些结构。本惯例适用于按照惯例设计的结构
A796/A796M
.
1.3
以SI单位或英寸-磅单位表示的值应单独视为标准值。每个系统中陈述的值不一定完全等同;因此,为确保符合标准,每个系统应独立使用,两个系统的数值不得合并使用。
1.3.1
为了清楚起见,在正文中括号中显示了SI单位,但它们是使用SI单位进行安装时的适用值。
1.4
本标准并不旨在解决与其使用相关的所有安全性问题(如果有)。本标准的使用者有责任在使用前建立适当的安全、健康和环境实践并确定法规限制的适用性。1.5
本国际标准是根据世界贸易组织技术性贸易壁垒(TBT)委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认的标准化原则制定的。
======意义和用途======
4.1
结构板结构在结构上起到柔性环的作用,该柔性环由压实的周围土壤支撑并与其相互作用。因此,放置在结构周围的土壤是结构系统的组成部分。因此,确保土壤结构由可接受的材料制成并且建造良好是很重要的。使用试验方法现场验证土壤结构的可接受性
D1556
,
D2167
,
D6938
,或
D2937
如适用,并将结果与任一测试方法进行比较
D698
或者
D1557
根据每个项目的规范,是安装可接受结构的最常见基础。根据所使用的回填,也可以使用工程师可接受的其他定性或基于性能的方法。所需的密度和测量方法没有由本惯例规定,但必须在每个项目的规范中确定。
4.2
结构板结构偶尔也用于不需要土壤-结构相互作用作为支撑的替代应用中。根据应用,结构可以提供临时或永久的支撑、限制、隐藏、屏蔽或与土壤-结构相互作用无关的其他功能。所需支撑的性质、设计要求和结构的适当尺寸将由项目设计工程师确定,不属于本标准范围。
1.1
This practice primarily covers procedures, soils, and soil placement for the proper installation of corrugated steel structural plate pipe, pipe-arches, arches, and underpasses produced to Specification
A761/A761M
, in either trench or embankment installations. This practice also covers installation of structural plate for alternative uses that do not involve backfilling or soil-structure interaction.
1.2
A typical trench installation and a typical embankment (projection) installation are shown in
Figs. 1 and
2
, respectively. Structural plate structures as described herein are those structures factory fabricated in plate form and bolted together on site to provide the required shape, size, and length of structure. This practice applies to structures designed in accordance with Practice
A796/A796M
.
1.3
The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system are not necessarily exact equivalents; therefore, to ensure conformance with the standard, each system shall be used independently of the other, and values from the two systems shall not be combined.
1.3.1
SI units are shown in brackets in the text for clarity, but they are the applicable values when the installation is to be performed using SI units.
1.4
This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.5
This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
====== Significance And Use ======
4.1
Structural plate structures function structurally as a flexible ring that is supported by and interacts with the compacted surrounding soil. The soil placed around the structure is thus an integral part of the structural system. It is therefore important to ensure that the soil structure is made up of acceptable material and is well constructed. Field verification of soil structure acceptability using Test Methods
D1556
,
D2167
,
D6938
, or
D2937
, as applicable, and comparing the results with either Test Methods
D698
or
D1557
, in accordance with the specifications for each project, is the most common basis for installation of an acceptable structure. Depending on the backfill used, other qualitative or performance-based methods acceptable to the engineer may also be used. The required density and method of measurement are not specified by this practice, but must be established in the specifications for each project.
4.2
Structural plate structures are also occasionally used in alternative applications not requiring soil-structure interaction for support. Depending on the application the structure may provide temporary or permanent support, confinement, concealment, shielding, or other functions not related to soil-structure interaction. The nature of support required, design requirements, and proper sizing of the structure will be determined by a project design engineer and is not part of the scope of this standard.