作废
CEN/TS 1992-4-5:2009
到馆提醒
收藏跟踪
分享链接
购买正版
选择购买版本
本服务由中国标准服务网提供
更多
前往中国标准服务网获取更多购买信息
支持批量购买纸质版标准
Design of fastenings for use in concrete - Part 4-5: Post-installed fasteners - Chemical systems
用于混凝土的紧固件设计 - 第4-5部分:后装紧固件 - 化学系统
发布日期:
2009-05-27
废止日期:
2018-07-18
1.1总则
1.1.6本文档依赖于欧洲技术规范中规定的特性电阻和距离。一般来说,设计概念在产品尺寸6中是有效的,低于或等于hef/dnom较差或等于20。特定紧固件的实际范围可以取自相关的欧洲技术规范。至少应将欧洲技术规范中的以下特征作为本CEN/TS设计方法的基础。
- NRk,s,VRk,s
- (.)
- (.)
- ccr,N,scr,N
- ccr,sp,scr,sp
- cmin,smin
- 嗯
- 对基础材料混凝土强度等级的限制
- kcr,kucr,kT,k2,k3,k4,k8
- dnom,hef,lf,对hef/dnom的限制
- yMi,推荐的部分因素见CEN/TS 1992-4-1:2009,第4条
1.1 General
1.1.6 This document relies on characteristic resistances and distances which are stated in a European Technical Specification. In general the design concept is valid in the product dimensions 6 inferior, or equal, to hef/dnom inferior, or equal, to 20. The actual range for a particular fastener may be taken from the relevant European Technical Specification. In minimum the following characteristics should be given in the relevant European Technical Specification as base for the design method of this CEN/TS.
- NRk,s, VRk,s
- (.)
- (.)
- ccr,N, scr,N
- ccr,sp, scr,sp
- cmin, smin
- hmin
- limitations on concrete strength classes of base material
- kcr, kucr, kT, k2, k3, k4, k8
- dnom, hef, lf, limitations on hef/dnom
- yMi, recommended partial factors see CEN/TS 1992-4-1:2009, clause 4