本文件规定了设计和试验的安全要求和验证措施 建造便携式、手持式、内燃机驱动的切断机，用于 可由一名操作员用于切割建筑材料，如沥青、混凝土、石材 还有金属。它仅适用于专门设计用于旋转粘结磨料的机器 和/或具有最大外径的超研磨（例如金刚石）切割轮 430毫米，中心安装在主轴上，由主轴驱动，车轮顶部旋转离开 来自操作员（见图1）。交叉引用:IEC 60745-1:2006ISO 8041-1:2017ISO 7293:1997（R08）ISO 5349-2:2001ISO 3744:2010ISO 12100:2010ISO 4871:1996ISO 14982:1998（R09）ISO 16063-1:1998（R04）ISO 13857:2008ISO 20643:2005ISO 16063-1:1998IEC 61672-1:2013ISO 11201:2010ISO 11691:？ISO/TR 11688- 安西B7。1:2017ISO 22868:？CR 1030-1:1995ISO 7574-4:1985ISO/TR 11688-2:1998ISO 3767-5:2016ISO 14163:1998ISO 13732-1:2006EN 12413:2019ISO 11684:1995ISO 11820:1996ISO 5349-1:2001EN 12096:1997EN 13236:2019购买本文件时提供的所有当前修改件均包括在内。

This document specifies safety requirements and measures for their verification for the design and construction of portable, hand-held, internal combustion engine-driven cut-off machines intended to be used by a single operator in the cutting of construction materials, such as asphalt, concrete, stone and metal. It is applicable only to those machines designed purposely for use with a rotating, bondedabrasive and/or super-abrasive (for example diamond) cut-off wheel having a maximum outer diameter of 430 mm, centre-mounted on and driven by a spindle shaft where the top of the wheel rotates away from the operator (see Figure 1).Cross References:IEC 60745-1:2006ISO 8041-1:2017ISO 7293:1997 (R08)ISO 5349-2:2001ISO 3744:2010ISO 12100:2010ISO 4871:1996ISO 14982:1998 (R09)ISO 16063-1:1998 (R04)ISO 13857:2008ISO 20643:2005ISO 16063-1:1998IEC 61672-1:2013ISO 11201:2010ISO 11691:?ISO/TR 11688-1ANSI B7.1:2017ISO 22868:?CR 1030-1:1995ISO 7574-4:1985ISO/TR 11688-2:1998ISO 3767-5:2016ISO 14163:1998ISO 13732-1:2006EN 12413:2019ISO 11684:1995ISO 11820:1996ISO 5349-1:2001EN 12096:1997EN 13236:2019All current amendments available at time of purchase are included with the purchase of this document.