首页 馆藏资源 标准快讯 标准数字化 呈缴征集 标准服务 关于我们
作废 ASTM F1803-06
到馆提醒
收藏跟踪
购买正版
Standard Specification for Poly (Vinyl Chloride)(PVC) Closed Profile Gravity Pipe and Fittings Based on Controlled Inside Diameter (Withdrawn 2015) 基于受控内径的聚氯乙烯(PVC)封闭型重力管和配件标准规范(2015年撤销)
发布日期: 2006-04-01
废止日期: 2015-01-14
1.1本规范涵盖了尺寸为(18至60英寸)的带整体钟形和弹性密封接头的聚氯乙烯(PVC)封闭型材污水管和配件或带联轴器的平端管的要求基于受控内径。 1.2以英寸-磅为单位的数值应视为标准值。括号中给出的值仅供参考。 以下安全危险警告仅适用于本规范试验方法部分第节: 本标准并非旨在解决与其使用相关的所有安全问题(如有)。本标准的用户有责任在使用前制定适当的安全和健康实践,并确定监管限制的适用性。 注1 按照本规范生产的管道和管件应按照规程D 2321进行安装。
1.1 This specification covers requirements for poly(vinyl chloride) (PVC) closed profile sewer pipe and fittings with integral bell and elastomeric seal joints or plain end pipe with couplings in sizes (18 to 60 in.) based on a controlled inside diameter. 1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only. The following safety hazard caveat pertains only to the test methods portion, Section, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Note 1 Pipe and fittings produced to this specification should be installed in accordance with Practice D 2321.
分类信息
关联关系
研制信息
归口单位: F17.62
相似标准/计划/法规
现行
ASTM D3678-26a
Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Interior-Profile Extrusions
硬质聚氯乙烯(PVC)内型材挤压件的标准规范
2026-10-01
现行
ASTM F1803-25
Standard Specification for Poly(Vinyl Chloride) (PVC) Closed Profile Gravity Pipe and Fittings Based on Controlled Inside Diameter 
基于受控内径的聚氯乙烯(PVC)封闭型材重力管和配件的标准规范
2025-08-01
现行
ASTM D8427-25
Standard Specification for Rigid Poly Vinyl Chloride (PVC) Exterior Profiles Used for Sheet Piling
板桩用硬质聚氯乙烯(PVC)外部型材的标准规范
2025-06-01
现行
ASTM F3459-21
Standard Specification for Rigid Poly Vinyl Chloride (PVC) Exterior Profiles Used for Sound Walls
隔音墙用硬质聚氯乙烯(PVC)外部型材的标准规范
2021-01-01
现行
ASTM F964-13(2024)
Standard Specification for Rigid Poly (Vinyl Chloride) (PVC) Exterior Profiles Used for Fencing and Railing
围栏和栏杆用硬质聚氯乙烯(PVC)外型材标准规范
2024-09-01
现行
ASTM D4216-22
Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Related PVC and Chlorinated Poly(Vinyl Chloride) (CPVC) Building Products Compounds
硬质聚氯乙烯(PVC)及相关PVC和氯化聚氯乙烯(CPVC)建筑产品化合物的标准规范
2022-05-01
现行
ASTM D3679-25
Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding
刚性聚氯乙烯(PVC)壁板的标准规格
2025-07-01
现行
ASTM D4477-24
Standard Specification for Rigid (Unplasticized) Poly(Vinyl Chloride) (PVC) Soffit
硬质(未增塑)聚氯乙烯(PVC)拱腹的标准规范
2024-04-01
现行
ASTM F1336-20(2025)
Standard Specification for Poly(Vinyl Chloride) (PVC) Gasketed Sewer Fittings
聚氯乙烯(PVC)垫片下水道管件标准规范
2025-05-01
现行
ASTM D2729-21
Standard Specification for Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
聚氯乙烯(PVC)污水管和配件的标准规范
2021-11-01
现行
ASTM F1735-21
Standard Specification for Poly (Vinyl Chloride) (PVC) Profile Strip for PVC Liners for Rehabilitation of Existing Man-Entry Sewers and Conduits
聚氯乙烯(PVC)型材PVC标准规范用于修复现有进水下水道和管道的PVC衬板
2021-02-15
现行
ASTM D4726-24
Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Exterior-Profile Extrusions Used for Assembled Windows and Doors
组装门窗用硬质聚氯乙烯(PVC)外型材挤压件的标准规范
2024-02-01
现行
ASTM D1784-25
Standard Classification System and Basis for Specification for Rigid Poly(Vinyl Chloride) (PVC) Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds
硬质聚氯乙烯(PVC)化合物和氯化聚氯乙烯(CPVC)化合物的标准分类系统和基本规范
2025-07-01
现行
ASTM D6263-23
Standard Specification for Extruded Rods and Bars Made From Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC)
硬质聚氯乙烯(PVC)和氯化聚氯乙烯(CPVC)制成的挤压棒材和棒材的标准规范
2023-02-01
现行
AASHTO M 304-11(2023)
Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Wall Drain Pipe and Fittings Based on Controlled Inside Diameter
基于受控内径的聚氯乙烯(PVC)异型壁排水管和配件的标准规范
现行
ASTM F794-21
Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based on Controlled Inside Diameter
聚合物标准规格
2021-04-01
现行
ASTM F1970-24
Standard Specification for Special Engineered Fittings, Appurtenances or Valves for use in Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Systems
聚氯乙烯(PVC)或氯化聚氯乙烯(CPVC)系统用特殊工程配件、附件或阀门的标准规范
2024-11-01
现行
ASTM F1732-24
Standard Specification for Poly(Vinyl Chloride) (PVC) Sewer and Drain Pipe Containing Recycled PVC Material
含有再生聚氯乙烯材料的聚氯乙烯下水道和排水管的标准规范
2024-04-01
现行
ASTM F656-25
Standard Specification for Primers for Use in Solvent Cement Joints of Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe and Fittings
聚氯乙烯(PVC)和氯化聚氯乙烯(CPVC)塑料管和配件的溶剂水泥接头用底漆的标准规范
2025-12-01
现行
ASTM D4396-22
Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds for Plastic Pipe and Fittings Used in Nonpressure Applications
非压力应用塑料管和配件用硬质聚氯乙烯(PVC)和氯化聚氯乙烯(CPVC)化合物
2022-09-01