1.1 本规程涵盖了模制玻璃钢层压板零件目视检查的验收标准。 1.2 本规程提供了可能缺陷的文字描述，作为合同、图纸、产品规范和最终检查的指南。 1.3 本规程还对产品质量等级的不同检验要求进行了分类。 1.4 本规范验收等级类别内允许缺陷的允许尺寸和频率是一般性的，与特定的服务要求无关。应根据买方和供应商之间达成的特定服务要求，制定第四级允许缺陷，定义允许的尺寸、频率和允许的维修程序。 1.5 以国际单位制表示的数值应视为标准。括号中给出的值仅供参考。 1.6 本标准并非旨在解决与其使用相关的所有安全问题（如有）。本标准的用户有责任在使用前制定适当的安全和健康实践，并确定监管限制的适用性。 注1: 没有已知的ISO等效于本标准。

1.1 This practice covers acceptance criteria for visual inspection of parts made from molded glass-reinforced plastic laminates. 1.2 This practice presents word descriptions of possible defects to serve as a guide for contracts, drawings, product specifications, and final inspection. 1.3 This practice also categorizes different inspection requirements for levels of product quality. 1.4 The allowable size and frequency of permitted defects within the acceptance level categories of this specification are general and not related to specific service requirements. A Level IV of allowable defects which defines allowable size, frequency, and permitted repair procedures should be established for specific service requirements as agreed upon between the purchaser and the supplier. 1.5 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Note 1: There is no known ISO equivalent to this standard.