除ISO 16092-1外，BS EN ISO 16092-3:2018还规定了液压机的设计、制造和供应人员应采取的技术安全要求和措施，这些液压机旨在加工冷金属或部分由冷金属制成的材料。本文件涵盖的压力机的尺寸范围从单一操作员生产小型工件的小型高速机器到多个操作员和大型复杂工件的大型相对低速机器。本文件涉及液压机按预期使用时以及在制造商合理预见的误用条件下的所有重大危险（见第4条）。ISO 12100:2010，5.4中所述的机械寿命的所有阶段都已考虑在内。 交叉引用:ISO 12100:2010 Ed 1ISO 4413:2010 CD-ROM Ed 3ISO 16092-1:2017ISO 13849-1:2015IEC 60947-5-8ISO 9355-3EN 1299EN 626-1EN 1837ISO 14118EN 1005-3ISO 15534-3ISO 11228-1ISO 15534-2IEC 61310-2ISO 15534-1ISO 14738ISO 9355-1IEC 60529ISO/TR 11688-2ISO 1116161EN 1005-2EN 614-2EN 1127-1ISO 6385EN 1005-1ISO 9355-2ISO 14119:2013 ED2ISO将于当前修订时提供购买本文件时包括购买费用。

BS EN ISO 16092-3:2018, in addition to ISO 16092-1, specifies the technical safety requirements and measures to be adopted by persons undertaking the design, manufacture and supply of hydraulic presses which are intended to work cold metal or material partly made up of cold metal.The presses covered by this document range in size from small high-speed machines with a single operator producing small workpieces to large relatively slow-speed machines with several operators and large complex workpieces.This document deals with all significant hazards relevant for hydraulic presses when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). All the phases of the lifetime of the machinery as described in ISO 12100:2010, 5.4 have been taken into consideration.Cross References:ISO 12100:2010 Ed 1ISO 4413:2010 CD-ROM Ed 3ISO 16092-1:2017ISO 13849-1:2015IEC 60947-5-8ISO 9355-3EN 1299EN 626-1EN 1837ISO 14118EN 1005-3ISO 15534-3ISO 11228-1ISO 15534-2IEC 61310-2ISO 15534-1ISO 14738ISO 9355-1IEC 60529ISO/TR 11688-2ISO 11161EN 1005-2EN 614-2EN 1127-1ISO 6385EN 1005-1ISO 9355-2ISO 14119:2013 ED2ISO 13849-2:2012All current amendments available at time of purchase are included with the purchase of this document.