现行
BS EN ISO 11810:2015
到馆提醒
收藏跟踪
分享链接
购买正版
选择购买版本
本服务由中国标准服务网提供
更多
前往中国标准服务网获取更多购买信息
支持批量购买纸质版标准
Lasers and laser-related equipment. Test method and classification for the laser resistance of surgical drapes and/or patient protective covers. Primary ignition, penetration, flame spread and secondary ignition
激光和激光相关设备 外科手术覆盖物和/或患者防护罩耐激光的试验方法和分类 一次点火、穿透、火焰蔓延和二次点火
BS EN ISO 11810:2015适用于一次性和可重复使用,以及机织和非织造材料
用于外科手术的覆盖物和其他声称抗激光的患者防护罩的材料。
本国际标准的目的是为测试和测试提供标准化方法
根据激光引起的危害,对手术帷幔和其他患者防护罩进行分类。
给出了相应的分类体系。本国际标准的目的不是
作为通用消防安全规范,因此,本国际标准不包括其他
火源。所有材质都会反射光束的一部分,用户有必要决定是否镜面反射
反射率可能是一种危险。然而,本国际标准不包括这种测量。该测试程序可用于评估非耐激光材料的激光诱导可燃性
项目。注:使用该方法测试的产品的用户应注意,手术用窗帘的抗激光性
和/或患者防护罩将对波长敏感,且手术布帘和/或患者-
防护的
盖子最好在预期使用的波长下进行测试。如果使用其他波长进行测试,它
必须明确说明电源设置和传输模式。交叉引用:ISO 11145ISO 11146-1ISO 80000-4IEC 60825-193/42/EECISO 139ISO 1144ISO 2947ISO 4880ISO 6940ISO 6941ISO 9773IEC 60601-2-22EN 13795EN 14079购买本文件时提供的所有现行修订均包括在内。
BS EN ISO 11810:2015 is applicable to disposable and reusable, as well as woven and non-woven
materials used as surgical drapes and other patient-protective covers which claim to be laser-resistant.
The purpose of this International Standard is to provide a standardized method for testing and
classifying surgical drapes and other patient-protective covers with respect to laser-induced hazards.
An appropriate classification system is given. It is not the purpose of this International Standard to
serve as a general fire safety specification, and as such, this International Standard does not cover other
sources of ignition.All materials reflect portions of the beam and it is necessary for the user to decide whether specular
reflectance can be a hazard. This measurement, however, is not covered in this International Standard.The test procedure can be used to assess the laser induced flammability properties of non-laser-resistant
items.NOTE Users of products tested by this method are cautioned that the laser resistance of a surgical drape
and/or patient-protective cover will be wavelength sensitive and that a surgical drape and/or patient-protective
cover are better tested at the wavelength for which it is intended to be used. If tested using other wavelengths, it
is necessary to explicitly state the power settings and modes of delivery.Cross References:ISO 11145ISO 11146-1ISO 80000-4IEC 60825-193/42/EECISO 139ISO 1144ISO 2947ISO 4880ISO 6940ISO 6941ISO 9773IEC 60601-2-22EN 13795EN 14079All current amendments available at time of purchase are included with the purchase of this document.