作废
ASTM F2762-11e1
到馆提醒
收藏跟踪
分享链接
购买正版
选择购买版本
本服务由中国标准服务网提供
更多
前往中国标准服务网获取更多购买信息
支持批量购买纸质版标准
Standard Specification for 12 to 30 in. (300 to 750 mm) Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications (Withdrawn 2016)
标准规格为12至30英寸(300至750毫米)环形波纹型墙体聚乙烯(PE)用于卫生下水道应用的管件和配件(撤回2016)
发布日期:
2011-01-01
废止日期:
2016-11-04
1.1本规范涵盖了带内衬的环形波纹型壁聚乙烯管和配件的要求和试验方法。覆盖的标称内径为12至30英寸。(300至750毫米)。
1.2本规范的要求旨在为无压生活污水系统提供适合地下使用的管道和配件。根据本规范生产的管道和管件应按照规程D2321进行安装。
1.3本规范涵盖使用波纹外部轮廓的内衬管道和管件(
图1
).
1.4
单位-
以英寸-磅为单位的数值应视为标准值。括号中给出的值是到国际单位制的数学转换,仅供参考,不被视为标准值。
1.5
本标准并非旨在解决与其使用相关的所有安全问题(如有)。本标准的用户有责任在使用前制定适当的安全和健康实践,并确定监管限制的适用性。
1.1 This specification covers requirements and test methods for annular, corrugated profile wall polyethylene pipe and fittings with an interior liner. The nominal inside diameters covered are 12 to 30 in. (300 to 750 mm).
1.2 The requirements of this specification are intended to provide pipe and fittings suitable for underground use for non-pressure sanitary sewer systems. Pipe and fittings produced in accordance with this specification shall be installed in compliance with Practice D2321.
1.3 This specification covers pipe and fittings with an interior liner using a corrugated exterior profile (
Fig. 1
).
1.4
Units—
The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.5
This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.