首页 馆藏资源 标准快讯 标准数字化 呈缴征集 标准服务 关于我们
作废 ASTM D5474-93(2012)
到馆提醒
收藏跟踪
购买正版
Standard Guide for Selection of Data Elements for Groundwater Investigations (Withdrawn 2021) 地下水调查数据元素选择标准指南
发布日期: 2012-05-01
废止日期: 2021-01-21
1.1本指南涵盖了地下水现场文件的数据元素选择。四个ASTM标准中描述了数据元素,概述了可能在地下水现场收集的信息。给出了具体调查的例子,以及为什么选择单个数据元素和数据元素组合以满足研究要求的逻辑。 注1 — 地下水现场是能够从地表以下的自然地层中产生水或水文数据的任何来源、位置或采样站。水源或设施可以包括井、泉水或渗漏、排水沟或隧道(方向接近水平)。其他来源,如挖掘、驱动装置、钻孔、池塘、湖泊和天坑,可以证明与地下水有水力连接,适用于预期用途。 注释2 — 描述地下水数据元素的四个ASTM标准是实践 D5254 和指南 D5408 , D5409 和 D5410 . 1.2系统和一致的数据收集对于调查地下水资源的可用性和保护或恢复是必要的。详细程度、精度和偏差以及需要收集的数据类型取决于研究目标、系统的预期复杂性和可用于调查的资源。本指南介绍了应为特定研究收集哪些信息,为什么某些数据元素是强制性的,以及维持这些数据收集和保留的质量控制对当前和未来调查的重要性。本指南重点介绍在现场收集的数据元素- 现场位置和用于帮助解释地下水源的水文,并满足监管要求。其他标准中阐述了其他分析和质量保证/质量控制(QA/QC)注意事项,超出了本指南的范围。 1.3 本标准并非旨在解决与其使用相关的所有安全问题(如有)。本标准的用户有责任在使用前制定适当的安全和健康实践,并确定监管限制的适用性。 1.4 本指南提供了有组织的信息收集或一系列选项,并不推荐具体的行动方案。本文件不能取代教育或经验,应与专业判断一起使用。 并非本指南的所有方面都适用于所有情况。本ASTM标准不代表或取代必须根据其判断给定专业服务的充分性的谨慎标准,也不应在不考虑项目的许多独特方面的情况下应用本文件。本文件标题中的“标准”一词仅表示该文件已通过ASTM共识程序获得批准。 ====意义和用途====== 5.1出于多种目的,在地下水现场收集数据。每个目的都需要不同的数据元素组合。然而,每个地下水现场必须包含一组最少的数据元素,通过坐标和政治制度精确定位,绝对识别所有者和数据源,并明确定义基本现场特征,从而唯一地识别该现场。 实践中描述了该信息 D5254 . 5.2作为地下水项目的一部分,每个现场需要超出最小集的额外数据元素,以帮助解释局部和区域水文。例如,对于地下水盆地的水文勘测研究,每个水井或泉水现场都需要有关施工、水位、产量、地质和水化学的基本信息。如果项目是废物设施调查,则需要额外信息,通常是为了满足当地、州和联邦环境法规。
1.1 This guide covers the selection of data elements for the documentation of groundwater sites. The data elements are described in four ASTM standards outlining information that may be collected at groundwater sites. Examples of specific investigations are given with the logic of why to select individual and combinations of data elements to meet the requirements of the studies. Note 1 — A groundwater site is any source, location, or sampling station capable of producing water or hydrologic data from a natural stratum from below the surface of the earth. A source or facility can include a well, spring or seep, and drain or tunnel (nearly horizontal in orientation). Other sources, such as excavations, driven devices, bore holes, ponds, lakes, and sinkholes, that can be shown to be hydraulically connected to the groundwater, are appropriate for the use intended. Note 2 — The four ASTM standards that describe the data elements for groundwater are Practice D5254 and Guides D5408 , D5409 , and D5410 . 1.2 Systematic and consistent data collection are necessary for the investigation of the availability and the protection or restoration of groundwater resources. The level of detail, precision and bias, and the type of data that need to be collected depend on the objective of the study, the expected complexity of the system, and the resources available for the investigation. This guide presents ideas on what information should be collected for specific studies, why certain data elements are mandatory, and the importance to current and future investigations of maintaining quality control on the collection and retention of these data. This guide focuses on those data elements that are gathered at the field-site location and are used to assist in interpreting the hydrology of the groundwater source and to meet regulatory requirements. Other analytical and quality assurance/quality control (QA/QC) considerations are addressed in other standards and beyond the scope of this guide. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 1.4 This guide offers an organized collection of information or a series of options and does not recommend a specific course of action. This document cannot replace education or experience and should be used in conjunction with professional judgment. Not all aspects of this guide may be applicable in all circumstances. This ASTM standard is not intended to represent or replace the standard of care by which the adequacy of a given professional service must be judged, nor should this document be applied without consideration of a project's many unique aspects. The word “Standard” in the title of this document means only that the document has been approved through the ASTM consensus process. ====== Significance And Use ====== 5.1 Data are gathered at groundwater sites for many purposes. Each purpose requires a different combination of data elements. However, it is mandatory that every groundwater site include a minimum set of data elements to uniquely identify that site by precisely locating with coordinates and political regimes, absolutely identifying the owner and data source, and clearly defining the basic site characteristics. This information is described in Practice D5254 . 5.2 As a part of a groundwater project, each site requires additional data elements, beyond the minimum set, to assist in the interpretation of the local and areal hydrology. As an example, for a hydrologic reconnaissance study of a groundwater basin, each well or spring site requires basic information concerning construction, water level, yield, geology, and water chemistry. Additional information is needed if the project is a waste facility investigation, usually to satisfy local, state, and federal environmental regulations.
分类信息
关联关系
研制信息
归口单位: D18.21
相似标准/计划/法规