BS EN IEC 62677-3-102:2018适用于热收缩中压模制型材 适用于绝缘、环境密封、机械保护、， 电力电缆终端、接头和止动端的应变消除。这些模制的形状 已发现适用于-40°C和100°C之间的温度。模制形状可提供预涂粘合剂。粘合剂指南 附件A中给出了兼容性和温度性能。制造商/供应商 可以咨询您的选择。符合本文件要求的材料符合既定的性能水平。然而 用户为特定应用选择的材料将基于实际情况 在该应用中充分发挥性能所必需的要求，且不会基于 只有这份文件。规定的试验旨在控制模制形状的质量，但实际上并非如此 确认其设计用于低压和中压电缆附件 因此，电气性能将作为组件的一部分进行验证。这方面的例子 IEC 60502（所有部分）、EN 50393和HD 629中有描述。交叉引用:HD 457 S1EN IEC 62677-2IEC 62677-1EN 60296EN IEC 62677-1IEC 62677-2IEC 60757IEC 60296HD 629EN ISO 846:1997IEC 60502EN 60684-3-283（IEC 60684-3-283:2010）ASEN 60684-3-280 Amd 1（04/14）IEC ASIEC 60684-3-280:2010/AMD1:2013IEC 60684-3-283:2010/AMD1:2013EN 50393:2006EN 60684-3-280（IEC 60684-283:2010）ISO 6063-283:201460684-3-280:2010购买本文件时可获得的所有现行修订均包含在购买本文件中。

BS EN IEC 62677-3-102:2018 is applicable to heat shrinkable medium voltage moulded shapes in a range of configurations suitable for insulation, environmental sealing, mechanical protection, strain relief for power cable terminations, joints and stop ends. These moulded shapes have been found suitable for use for temperatures between -40 °C and 100 °C.The moulded shapes can be supplied with a pre-coated adhesive. A guide to adhesive compatibility and temperature performance is given in Annex A. The manufacturers/suppliers can be consulted for options.Materials which conform to this document meet established levels of performance. However, the selection of a material by a user for a specific application will be based on the actual requirements necessary for adequate performance in that application and will not be based on this document alone.The tests specified are designed to control the quality of the moulded shapes but it is recognized that they are designed to be used in low and medium voltage cable accessories and as such electrical performance will be proven as part of the assembly. Examples of this are described in IEC 60502 (all parts), EN 50393 and HD 629.Cross References:HD 457 S1EN IEC 62677-2IEC 62677-1EN 60296EN IEC 62677-1IEC 62677-2IEC 60757IEC 60296HD 629EN ISO 846:1997IEC 60502EN 60684-3-283(IEC 60684-3-283:2010)ASEN 60684-3-280 Amd 1 (04/14) IEC ASIEC 60684-3-280:2010/AMD1:2013IEC 60684-3-283:2010/AMD1:2013EN 50393:2006EN 60684-3-280 (IEC 60684-3-280:2010)ASEN 60684-3-283 Amd 1 (04/14) IEC ASIEC 60684-3-283:2010ISO 846:1997IEC 60684-3-280:2010All current amendments available at time of purchase are included with the purchase of this document.