1.1 本试验方法涵盖了环氧树脂的手动和自动滴定程序，用于定量测定0.1至26%环氧含量 % 环氧化物。 1.2 以国际单位制表示的数值应视为标准。括号中给出的值仅供参考。 1.3 本标准并非旨在解决与其使用相关的所有安全问题（如有）。本标准的用户有责任在使用前制定适当的安全、健康和环境实践，并确定监管限制的适用性。 有关具体的危险说明，请参阅第节 6. . 1.4 本国际标准是根据世界贸易组织技术性贸易壁垒（TBT）委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认标准化原则制定的。 ====意义和用途====== 4.1 环氧树脂的环氧含量是决定其反应性和由其制成的涂料性能的重要变量。这些测试方法可用于确定制造的环氧树脂的环氧含量，并确认所购环氧树脂的规定环氧含量。

1.1 This test method covers the procedure for manual and automatic titration of epoxy resins for the quantitative determination of the percent epoxide content from 0.1 to 26 % epoxide. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific hazard statements, see Section 6 . 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ====== 4.1 The epoxy content of epoxy resins is an important variable in determining their reactivity and the properties of coatings made from them. These test methods may be used to determine the epoxy content of manufactured epoxy resins and confirm the stated epoxy content of purchased epoxy resins.