首页 馆藏资源 标准快讯 标准数字化 呈缴征集 标准服务 关于我们
作废 ASTM A978/A978M-08(2013)
到馆提醒
收藏跟踪
购买正版
Standard Specification for Composite Ribbed Steel Pipe, Precoated and Polyethylene Lined for Gravity Flow Sanitary Sewers, Storm Sewers, and Other Special Applications (Withdrawn 2020) 复合罗纹钢管 预涂层和聚乙烯重力流水卫生下水道 暴雨下水道及其他特殊应用的标准规范
发布日期: 2013-11-01
废止日期: 2020-05-05
1.1本规范涵盖了用于重力流卫生下水道、雨水管和其他特殊应用(如输水管、修复管、滑移线管和灌溉管)的预涂层和聚乙烯内衬复合带肋钢管,其中需要额外的耐腐蚀性和耐磨性。用于制造管道的钢板在两侧的锌金属涂层上具有聚合物涂层。此外,在制造管道时,用聚乙烯填充肋条,然后将聚乙烯衬里挤压到内表面。 1.2除了金属涂层提供的保护外,外部聚合物预涂层还为钢材提供了额外的土壤侵蚀保护,并为阴极保护提供了介电屏障。内部聚合物预涂层在镀锌钢和聚乙烯衬里之间提供粘合层。 应用的衬里提供内部保护,防止腐蚀、侵蚀和磨损。通过填充具有三角形形状的肋(管壁开口处比肋底部小),聚乙烯机械连接到管壁,然后聚乙烯衬里热粘合到填充的肋。 1.3本规范不包括垫层、回填或覆土荷载与管道板厚之间关系的要求。经验表明,该产品的成功性能取决于板材厚度、垫层和回填类型的正确选择、工厂的受控制造以及安装过程中的谨慎。安装程序见规程A798/A798M。 1.4本规范适用于以英寸-磅为单位(A978)或以国际单位(SI)为单位(A978M)的订单。英寸磅单位和国际单位不一定相等。 为清楚起见,文本中的括号中显示了国际单位制,但当材料订购至A978M时,它们是适用的值。 1.5 本标准并非旨在解决与其使用相关的所有安全问题(如有)。本标准的用户有责任在使用前制定适当的安全和健康实践,并确定监管限制的适用性。
1.1 This specification covers composite ribbed steel pipe, precoated and polyethylene lined intended for use for gravity flow sanitary sewers, storm sewers, and other special applications such as water transmission pipe, rehabilitation pipe, slip line pipe, and irrigation pipe where extra corrosion and abrasion resistance are required. The steel sheet used in the fabrication of the pipe has a polymer coating over a metallic coating of zinc on both sides. In addition, as the pipe is being fabricated, the ribs are filled with polyethylene and then a polyethylene liner is extruded onto the interior surface. 1.2 The exterior polymer precoating provides extra protection of the steel against soilside corrosion, in addition to that provided by the metallic coating, and also provides a dielectric barrier for cathodic protection. The interior polymer precoating provides an adhesive layer between the galvanized steel and the polyethylene lining. The applied lining provides internal protection against corrosion, erosion, and abrasion. By filling the rib which has a deltoid shape (smaller at the opening in the pipe wall than at the bottom of the rib), the polyethylene is mechanically connected to the pipe wall and the polyethylene liner is then thermally bonded to the filled rib. 1.3 This specification does not include requirements for bedding, backfill, or the relationship between earth cover load and sheet thickness of the pipe. Experience has shown that the successful performance of this product depends upon the proper selection of sheet thickness, type of bedding and backfill, controlled manufacture in the plant, and care in the installation. The installation procedure is described in Practice A798/A798M. 1.4 This specification is applicable to orders in either inch-pound units as A978, or in SI units as A978M. Inch-pound units and SI units are not necessarily equivalent. SI units are shown in brackets in the text for clarity, but they are the applicable values when the material is ordered to A978M. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
分类信息
关联关系
研制信息
归口单位: A05.17
相似标准/计划/法规