1.1本试验方法包括测定聚乙烯瓶对烟尘积聚的相对敏感性。 1.2以国际单位制表示的数值应视为标准。括号中给出的值仅供参考。 注1——没有类似或等效的ISO标准。 1.3 本标准并非旨在解决与其使用相关的所有安全问题（如有）。本标准的用户有责任在使用前制定适当的安全和健康实践，并确定监管限制的适用性。 第8节和注释7中给出了具体的预防说明。 ====意义和用途====== 该试验方法为确定聚乙烯瓶对积聚烟尘的相对敏感性提供了一种有用的方法。特别是，该试验方法在评估抗静电添加剂或抗静电瓶表面处理或两者中都有用。经验表明，在实际使用条件下，本试验中瓶子的行为可能与灰尘和棉绒积累直接相关。 本试验方法提供了一种加速烟尘积聚的方法。然而，必须为每种应用建立本试验方法结果与实际使用条件的相关性。 虽然尚未对其他类型的塑料进行正式的循环试验，但已发现该试验方法对聚乙烯塑料以外的试验有用。 3. 在继续使用本试验方法之前，应参考被测材料的规范。材料规范中涵盖的任何试样制备、调节、尺寸或测试参数或其组合应优先于本试验方法中提及的。如果没有材料规范，则默认条件适用。

1.1 This test method covers the determination of the relative susceptibility of polyethylene bottles to soot accumulation. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. Note 1--There is no similar or equivalent ISO standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific precautionary statements are given in Section 8 and Note 7. ====== Significance And Use ====== This test method provides a useful means for determining the relative susceptibility of polyethylene bottles to accumulate soot. In particular, this test method has been found useful in evaluating antistatic additives or antistatic bottle surface treatments, or both. Experience has shown that the behavior of bottles in this test can be directly related to dust and lint accumulation under actual use conditions. This test method provides a means of accelerating soot accumulation. However, the correlation of the results of this test method to actual use conditions must be established for each application. Although no formal round-robin testing has been done on other types of plastics, this test method has been found useful for testing other than polyethylene plastics. 3 Before proceeding with this test method, reference should be made to the specification of the material being tested. Any test specimen preparation, conditioning, dimensions, or testing parameters, or combination thereof, covered in the materials specification shall take precedence over those mentioned in this test method. If there are no material specifications, then the default conditions apply.