BS IEC 62765-2:2019确定了以下方面的最低要求和适用实践: 纠正和防止因以下原因对核电厂（NPP）安全造成的任何潜在影响: 温度传感器的老化，如NPP电阻温度检测器（RTD） 以及热电偶（TCs）。交叉引用:IEC/IEEE 62582-1:2011IEC 62465:2010IEC 62397:2007IEC 62138:2004IEC 61515:2016IEC 60751:2008IEC 62385:2007IEC 60671:2007IEC 60584-3:2007IEC 60737:2010IEC 62651:2013IEC 62342:2007IEC 60584-1:2013IEC 61226:2009IEC/IEEE 60780-323:2016SSG- 39:2016NS-G-2.12:2009SSR-2/1:2016SSR-2/2:2016NUREG/CR-4928IAEA GS-G-3.1:2006NQA-1:2008NUREG/CR-5560IAEA-TECDOC-1169:2000ISA S67。06IAEA-TECDOC-1147:2000ITS-90IEC 61508-1:2010IEC 61508-2:2010IEC 61537:2006IEC 61508-3:2010IEC 61508-4:2010IEC 61224:1993IEC TR 62096:2009IEC 61513:2011IEC 61888:2002IEC 62765-1:2015购买本文件时提供的所有当前修改件均包括在内。

BS IEC 62765-2:2019 identifies minimum requirements and applicable practices for correcting and preventing any potential impacts on nuclear power plant (NPP) safety due to the ageing of temperature sensors, such as NPP resistance temperature detectors (RTDs) and thermocouples (TCs).Cross References:IEC/IEEE 62582-1:2011IEC 62465:2010IEC 62397:2007IEC 62138:2004IEC 61515:2016IEC 60751:2008IEC 62385:2007IEC 60671:2007IEC 60584-3:2007IEC 60737:2010IEC 62651:2013IEC 62342:2007IEC 60584-1:2013IEC 61226:2009IEC/IEEE 60780-323:2016SSG-39:2016NS-G-2.12:2009SSR-2/1:2016SSR-2/2:2016NUREG/CR-4928IAEA GS-G-3.1:2006NQA-1:2008NUREG/CR-5560IAEA-TECDOC-1169:2000ISA S67.06IAEA-TECDOC-1147:2000ITS-90IEC 61508-1:2010IEC 61508-2:2010IEC 61537:2006IEC 61508-3:2010IEC 61508-4:2010IEC 61224:1993IEC TR 62096:2009IEC 61513:2011IEC 61888:2002IEC 62765-1:2015All current amendments available at time of purchase are included with the purchase of this document.