现行

GB/T 31211.1-2024

无损检测 超声导波检测 第1部分：总则
Non-destructive testing—Ultrasonic guided-wave testing—Part 1: General principle

2024-04-25

现行

ISO 4773-2023

Non-destructive testing — Ultrasonic guided-wave testing using the phased-array technique
无损检测——相控阵超声导波检测

2023-10-05

现行

GB/T 43480-2023e

无损检测　相控阵超声柱面成像导波检测
Non-destructive testing—Guided wave testing of ultrasonic phased array cylindrical imaging

2023-12-28

现行

GB/T 43480-2023

无损检测 相控阵超声柱面成像导波检测
Non-destructive testing—Guided wave testing of ultrasonic phased array cylindrical imaging

2023-12-28

现行

T/CSTM 00212-2020

无损检测 螺栓相控阵柱面超声波成像检测与质量评定方法
Non-destructive testing Phase-array ultrasonic testing methods for inspecting bolts using cylindrical guided waves

2020-09-25

现行

T/CSTM 00213-2020

无损检测 输电线路架空地线电磁超声导波检测方法
Non-destructive testing Method of electromagnetic ultrasonic guided wave detection for overhead transmission lines

2020-09-25

现行

GB/T 19799.2-2024

无损检测　超声检测试块　第2部分：2号标准试块
Non-destructive testing—Ultrasonic testing block—Part 2:Calibration block No.2

2024-11-28

现行

T/CSTM 00422-2022

无损检测 中低频磁致伸缩超声导波B扫描检测方法
Non-destructive testing — B-scan test method for low and medium frequency ultrasonic guided waves based on magnetostrictive effect

2022-12-09

现行

T/CSTM 00423-2022

无损检测 中低频磁致伸缩超声导波检测设备的性能与验证
Non-destructive testing — Characterization and verification of low and medium frequency ultrasonic guided wave testing equipment based on magnetostrictive effect

2022-12-09

现行

KS B ISO 22232-2

비파괴검사 — 초음파탐상검사 장비의 검증과 특성 평가 — 제2부: 탐촉자
无损检测 超声检测设备的性能与检验 第2部分:探头

现行

KS B ISO 22232-2

비파괴검사 — 초음파탐상검사 장비의 검증과 특성 평가 — 제2부: 탐촉자
无损检测 超声检测设备的性能与检验 第2部分:探头

2026-03-17

现行

ISO 22232-2-2020

Non-destructive testing — Characterization and verification of ultrasonic test equipment — Part 2: Probes
无损检测 超声检测设备的性能与检验 第2部分:探头

2020-09-18

现行

GB/T 27664.2-2026

无损检测仪器 超声检测设备的性能与检验 第2部分：探头
Non-destructive testing instruments—Characterization and verification of ultrasonic test equipment—Part 2: Probes

2026-01-28

现行

GB/T 32073.1-2025

无损检测　测量残余应力的超声检测方法　第1部分：临界折射纵波法
Non-destructive testing—Ultrasonic testing method for measuring residual stress—Part 1:Critical refraction longitudinal wave method

2025-12-31

现行

UNE-EN 583-2-2001

NON-DESTRUCTIVE TESTING. ULTRASONIC EXAMINATION. PART 2: SENSITIVITY AND RANGE SETTING.
无损检测 超声波检查 第2部分:灵敏度和范围设置

2001-09-23

现行

GB/T 31213.2-2014

无损检测 铸铁构件检测 第2部分：声超声检测方法
Non-destructive testing―Testing of cast iron equipments and components―Part 2: Test method for acousto-ultrasonic

2014-09-03

现行

KS B ISO 25902-2

타이타늄 관 — 비파괴검사 — 제2부: 종방향 불완전부 검출을 위한 초음파탐상검사
钛管和钛管无损检测第2部分:纵向缺陷检测用超声波检测

2021-12-20

现行

KS B ISO 25902-2

타이타늄 관 — 비파괴검사 — 제2부: 종방향 불완전부 검출을 위한 초음파탐상검사
钛管和钛管无损检测第2部分:纵向缺陷检测用超声波检测

2021-12-20

现行

ISO 25902-2-2010

Titanium pipes and tubes — Non-destructive testing — Part 2: Ultrasonic testing for the detection of longitudinal imperfections
钛管和钛管——无损检测第2部分:纵向缺陷检测用超声波检测

2010-02-18

现行

UNE-EN 12668-2-2010

Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 2: Probes
无损检测超声检测设备的特性和验证第2部分:探头

2010-10-20