现行

DIN 802-5-1997-02

Toleranzen des Gewindeteiles von Gewindebohrern - Teil 5: Geschliffene Gewindebohrer fr metrisches ISO-Gewinde; Gewinde fr Festsitz nach DIN 8141-1 fr Regel- und Feingewinde; Fertigungstoleranzen des Gewindeteiles
螺纹丝锥螺纹部分的制造公差 ISO公制螺纹用接地丝锥 DIN 8141-1中的过盈配合螺纹

1997-02-01

现行

BS 949-4-1990

Screwing taps-Specification for metric ground thread taps: manufacturing tolerances
旋塞

1990-06-29

现行

GOST 7250-1960

Метчики для дюймовой резьбы. Допуски на резьбу
丝锥为英寸螺纹 螺纹公差

现行

DIN 8140-2-2005-08

Gewindeeinstze aus Draht fr Metrisches ISO-Gewinde - Teil 2: Aufnahmegewinde fr Gewindeeinstze, Gewindetoleranzen
ISO米制螺纹用钢丝螺纹嵌件.第2部分:螺纹嵌件用螺纹孔.螺纹公差

2005-08-01

现行

GOST 19831-1974

Метчики для трапецеидальной резьбы. Допуски на резьбу
水龙头死梯梯形螺纹 螺纹公差

现行

JB/T 12143-2015

米制螺纹复合丝锥
Combined Taps for metric threads

2015-04-30

现行

DIN 802-6-2003-07

Toleranzen des Gewindeteiles von Gewindebohrern - Teil 6: Geschliffene Gewindebohrer fr das Aufnahmegewinde (EG) fr Gewindeeinstze aus Draht nach DIN 8140 fr Metrisches ISO-Regel- und Feingewinde; Fertigungstoleranzen des Gewindeteiles
丝锥螺纹部分公差的制造.第6部分:DIN 8140中ISO米制粗牙和细牙螺纹用钢丝螺纹嵌件螺纹孔（EG）用磨制丝锥

2003-07-01

现行

UNE 16605-1991

GROUND THREAD TAPS FOR ISO METRIC THREADS OF TOLERANCES 4H TO 8H AND 4G TO 6G COARSE AND FINE PITCHES. MANUFACTURING TOLERANCES ON THE THREADED PORTION.
公差为4H至8H和4G至6G的ISO公制粗牙距和细牙距螺纹的磨光丝锥 螺纹部分的制造公差

1991-01-10

现行

ISO 2857-1973

Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches — Manufacturing tolerances on the threaded portion
公差为4H至8H和4G至6G的ISO公制粗牙距和细牙距用磨光丝锥——螺纹部分的制造公差

1973-12-01

现行

GOST 18843-1973

Метчики бесстружечные. Допуски на резьбу
非从属的水龙头 螺纹公差

现行

GOST 16925-1993

Метчики. Допуски на изготовление резьбовой части
水龙头螺纹部分的制造公差

1993-10-21

现行

GOST 19090-1993

Метчики для трубной цилиндрической резьбы. Допуски
管圆柱螺纹丝锥 公差

1993-10-21

现行

GB/T 968-2007

丝锥螺纹公差
Manufacturing tolerances on the threaded of portion taps

2007-07-26

现行

KS B 3340

미터 보통 나사용 너트 탭
螺母丝锥公制粗牙螺纹

2019-12-13

现行

KS B 3340

미터 보통 나사용 너트 탭
螺母丝锥公制粗牙螺纹

2024-12-20

现行

KS B 3340

미터 보통 나사용 너트 탭
螺母丝锥公制粗牙螺纹

2024-12-20

现行

JIS B 4430-1998

Short machine taps and hand taps for metric threads
公制螺纹用短机丝锥和手丝锥

1998-01-01

现行

GOST 24997-2004

Калибры для метрической резьбы. Допуски
公制螺纹的量规公差

2004-05-26

现行

ISO 2857-1973/Amd 1-1984

Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches — Manufacturing tolerances on the threaded portion — Amendment 1
公差为4H至8H和4G至6G的ISO公制粗牙距和细牙距螺纹用磨光丝锥.螺纹部分的制造公差.修改件1

1984-07-01

现行

ISO 2857-1973/Amd 2-1986

Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches — Manufacturing tolerances on the threaded portion — Amendment 2
公差为4H至8H和4G至6G的ISO公制粗牙距和细牙距螺纹用磨光丝锥.螺纹部分的制造公差.修改件2

1986-09-25