首页 馆藏资源 标准快讯 标准数字化 呈缴征集 标准服务 关于我们
现行 UL 155
到馆提醒
收藏跟踪
购买正版
Tests for Fire Resistance of Vault and Fire Room Doors 拱顶和消防室门耐火性试验
发布日期: 2000-04-05
请注意:此版本的所有临时修订版将在您购买时提供。保险库和消防室门的耐火试验。这些要求包括适用于保险库和档案室开口保护门耐火等级的试验程序。有关记录保护设备和技术的建议,包括使用和安装保险库或档案室门组件,请参见 《记录保护标准》,NFPA 232。术语“保险库门”和“档案室门”是指由单扇门或成对门、门悬挂框架和必要的 硬件这些组件旨在提供耐火性,并在一定程度上保护内容物在分类指定的时间段内不受热 在这些要求中进行了描述。建议在体积有限[不超过5000立方英尺(142立方米)]的外壳上使用拱顶门,其构造应确保内表面上没有任何点 当单独的拱顶构件或整个拱顶暴露在根据标准规定的火灾中时,温度将超过350°F(177°C) 时间-温度曲线。如图所示。文件室门建议用于大容量[不超过50000立方英尺(1420立方米)]的外壳,用于存储不充足的记录 提供保险库的经济合理性的重要性。预计可燃物的存放位置与未暴露表面的距离不得超过3英尺(0.91米) 车门与车门接合处之间的距离不得超过6英寸(152毫米)。其目的是,分类应记录暴露期间的性能,且不得解释为已确定火灾后使用的适用性 面临包含新特性、特性、组件、材料或系统的产品,或与本标准要求涵盖的特性、特性、组件、材料或系统不同的产品 涉及火灾、触电或人身伤害风险的,应使用适当的附加部件和终端进行评估- 产品维护要求 本标准意图最初预期的安全水平。其特征、特性、组件、材料或系统与 本标准的具体要求或规定不符合本标准。要求的修订应按照以下要求提出和采用: 制定、修订和实施本标准所采用的方法。
Please note: All interim revisions for this edition available at time of your purchase will be included.Tests for Fire Resistance of Vault and Fire Room DoorsUL 155These requirements cover the test procedure applicable to the fire-resistance classification of doors intended for the protection of openings of vaults and file rooms.Recommendations for record protection equipment and techniques, including the use and installation of vault or file room door assemblies, are contained in the Standard for Protection of Records, NFPA 232.The terms "vault doors" and "file room doors" refer to assemblies consisting of doors, single or in pairs, the frame into which doors are hung, and the necessary hardware. These assemblies are intended to provide fire resistance and protection to contents from heat for periods designated by the classifications to an extent described in these requirements.Vault doors are recommended for use on enclosures of limited volume [not exceeding 5000 cubic feet (142 m3)], constructed so that no point on the interior surface will reach a temperature exceeding 350 °F (177 °C) when separate vault members or the vault as a whole are exposed to a fire regulated according to the standard time-temperature curve. See Figure.File room doors are recommended for enclosures of large volume [not exceeding 50,000 cubic feet (1420 m3)] for the storage of records which are not of sufficient importance to economically justify the provision of vaults. It is anticipated that combustibles will not be stored nearer than 3 feet (0.91 m) from the unexposed face of the door nor 6 inches (152 mm) to the side from the door joints.It is intended that classification shall register performance during the period of exposure and shall not be construed as having determined suitability for use after fire exposure.A product that contains features, characteristics, components, materials, or systems new or different from those covered by the requirements in this standard, and that involves a risk of fire, electric shock, or injury to persons shall be evaluated using appropriate additional component and end-product requirements to maintain the the level of safety as originally anticipated by the intent of this standard. A product whose features, characteristics, components, materials, or systems conflict with specific requirements or provisions of this standard does not comply with this standard. Revision of requirements shall be proposed and adopted in conformance with the methods employed for development, revision, and implementation of this standard.
分类信息
发布单位或类别: 美国-美国保险商实验所
关联关系
研制信息
相似标准/计划/法规
现行
GB/T 24573-2009
金库和档案室门耐火性能试验方法
Fire resistance tests for vault and file room doors
2009-10-30
现行
ULC C155-1975
Preliminary Standards for Tests for Fire Resistance of Vault and File Room Doors
保险库和档案室门耐火试验初步标准
现行
UL Subject 155
Standard for Tests for Fire Resistance of Vault and File Room Doors (CSDS Proposal, 5/10/2013)
保险库和档案室门耐火试验标准(CSDS提案 5/10/2013)
2013-05-10
现行
KS F 2268-1(2020 Confirm)
방화문의 내화 시험방법
门组件耐火试验
2014-12-29
现行
KS F 2268-1
방화문의 내화 시험방법
门组件的耐火试验
2021-08-02
现行
KS F 2268-1
방화문의 내화 시험방법
门组件的耐火试验
2021-08-02
现行
GB/T 24480-2009
电梯层门耐火试验
Landing doors fire resistance test
2009-10-15
现行
BS 03/115061 DC
ISO 3008. Fire resistance tests. Test method for fire resistance of doors and shutters
ISO 3008 耐火试验 门和百叶窗耐火性的试验方法
2003-10-14
现行
GB/T 7633-2008
门和卷帘的耐火试验方法
Fire resistance tests - Door and shutter assemblies
2008-10-08
现行
GOST R 53307-2009
Конструкции строительные. Противопожарные двери и ворота. Метод испытаний на огнестойкость
建筑构造要素 防火门和门 耐火试验方法
现行
GOST R 52625-2006
Лифты. Двери шахт лифтов. Методы испытаний на огнестойкость
电梯着陆门 耐火试验方法
现行
ULC ORD-C263.7-2000
Room Fire Test Method for Garage Doors Using Foamed Plastic Insulation
使用泡沫塑料隔热材料的车库门室内火灾试验方法
现行
GB/T 38252-2019
建筑门窗耐火完整性试验方法
Test method of fire-resistant integrity for building windows and doors
2019-12-10
现行
NFPA(Fire) 288
Standard Methods of Fire Tests of Horizontal Fire Door Assemblies Installed in Horizontal Fire Resistance - Rated Assemblies, 2022 Edition
安装在水平耐火结构中的水平防火门组件的防火试验标准方法.额定组件 2022年版
2021-06-04
现行
KS B ISO 3008-2
내화성 시험 — 제2부: 승강장 문 조립체
耐火试验 - 第2部分:升降机大门组件
2018-06-19
现行
KS B ISO 3008-2(2023 Confirm)
내화성 시험 — 제2부: 승강장 문 조립체
耐火试验.第2部分:电梯层门组件
2018-06-19
现行
GOST 30247.3-2002
Конструкции строительные. Методы испытаний на огнестойкость. Двери шахт лифтов
建筑结构 耐火试验方法 电梯轴门
2001-12-05
现行
KS B ISO 3008-2
내화성 시험 — 제2부: 승강장 문 조립체
耐火试验第2部分:电梯层门组件
2024-06-07
现行
KS B ISO 3008-2
내화성 시험 — 제2부: 승강장 문 조립체
耐火试验第2部分:电梯层门组件
2024-06-07
现行
ISO 3008-2-2017
Fire-resistance tests — Part 2: Lift landing door assemblies
耐火试验 - 第2部分:升降梯门组件
2017-05-29