BS EN 14033-2:2017规定了旅行和运输的具体铁路技术要求 使用机器和其他车辆进行施工、维护和检查 本规范规定的轨道、结构、轨道形成和固定电力牵引设备 EN 14033-1。本欧洲标准适用于所有有轨机械和其他车辆，称为 机器-仅在铁路上工作（利用铁路和铁路之间的附着力 车轮），用于轨道、结构的施工、维护和检查， 基础设施和固定电力牵引设备。本欧洲标准适用于操作信号和控制的机器 系统。其他欧洲标准涉及其他类似机器，见附录M。本欧洲标准适用于1435 mm标称轨距。一些要求 可能适用于在标称窄轨距或标称轨距的基础设施上工作 宽轨距线路、有轨电车、铁路，除轨道和轨道之间的粘附 轨道车轮和地下基础设施。本欧洲标准涵盖了铁路专用问题的安全要求 在不同的基础设施上旅行和工作。这些要求的应用是 验证程序的对象，不构成本欧洲标准的一部分，但 附件一仅供参考。在所有情况下，需要获得工作授权才能访问 基础设施本欧洲标准也适用于处于工作位置的机器 支撑在压舱物或地层上的。参考文献:EN 12077-2:2:1998年7 7 7-2:2（R09）Ed2 2 2 2:2:2013+1:2016 EN 12999:2011 1 1 EN 50153:2013:2014 EN 1397:17 17 17 17:17 17 17 17 17:2011年EN 1397:2011年11 11 11 11:17 17 17 17:12 12 12 12 12:17 17 17 17 17 17 17:17 17 17 17 17 17 17:17 17 17 17 17:2013:2013:2011年EN 2009 2009 2009 2009 2009 2009 2009年EN 13917:17 17:17 17 17 17 17 17 17 17 17:17 17 17 17 17:17 17 17 17 17 17 17 17 17 17 17 17 17 17 17:2011年EN 13911 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11:11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11280:2013 EN 15954-1:2013 EN 13848-3:2009 EN 15955- 1:2013EN 15955-2:2013购买本文件时可获得的所有现行修订均包含在购买本文件中。

BS EN 14033-2:2017 defines the specific technical railway requirements for travelling and working with machines and other vehicles used for construction, maintenance and inspection of track, structures, track formation and fixed electric traction equipment as specified in EN 14033-1.This European Standard applies to all railbound machines and other vehicles - referred to as machines - working exclusively on the railway (utilizing adhesion between the rail and rail wheels) and used for construction, maintenance and inspection of track, structures, infrastructure and fixed electric traction equipment.This European Standard applies to machines that are intended to operate signalling and control systems. Other similar machines are dealt with in other European Standards, see Annex M.This European Standard is applicable to 1 435 mm nominal track gauge. Some requirements may be applicable for working on infrastructures with nominal narrow track gauge or nominal broad track gauge lines, tramways, railways utilizing other than adhesion between the rail and rail wheels and underground infrastructures.This European Standard covers the safety requirements for the railway specific problems for travelling and working on different infrastructures. The application of these requirements is the object of a verification procedure, which does not form part of this European Standard, but an Annex I is included for information. In all cases an authorization to work is needed to access the infrastructure.This European Standard is also applicable for machines that in working position are partly supported on the ballast or the formation.Cross References:EN 12077-2:1998ISO 7731:2003 (R09) Ed 2EN 15273-2:2013+A1:2016EN 12999:2011EN 50153:2014EN 13977:2011EN 45545-2:2013+A1:2015EN 14363:2016ISO 4310:2009EN 15877-1:2012EN ISO 7731:2008 (ISO 7731:2003) ASISO 4305:2014EN 45545-1:2013ISO 7010:2011 Ed 2EN 14033-3:2017EN ISO 7010:2012/A7:2017EN 14033-1:2017EN 1991-2:2003EN 50121-3-2:2016ISO 16754:2008 Ed 1EN 50317:2012EN 15954-2:2013EN 280:2013 EN 15954-1:2013EN 13848-3:2009EN 15955-1:2013EN 15955-2:2013All current amendments available at time of purchase are included with the purchase of this document.