首页 馆藏资源 标准快讯 标准数字化 呈缴征集 标准服务 关于我们
作废 ASTM D3404-15
到馆提醒
收藏跟踪
购买正版
Standard Guide for Measuring Matric Potential in Vadose Zone Using Tensiometers (Withdrawn 2024) 使用张力计测量瓦多斯区域基准电位的标准指南
发布日期: 2015-04-15
废止日期: 2024-01-03
1.1 本指南涵盖了使用张力计测量渗流区中的基质电位。描述了与成功现场使用商用和制造的张力计有关的理论和实践考虑。测量理论和现场目标用于制定张力计选择、安装和操作指南。 1.2 单位- 以国际单位制表示的数值应视为标准。 1.3 本标准并非旨在解决与其使用相关的所有安全问题(如有)。本标准的用户有责任在使用前制定适当的安全和健康实践,并确定监管限制的适用性。汞压力计的使用对汞的处理和潜在暴露具有固有的安全隐患。汞金属蒸汽中毒长期以来被认为是一种危害。当使用含有或需要使用汞的设备时,采取一切预防措施并小心避免汞蒸汽逸出或汞溢出。 工业大气中汞浓度的最大限值由政府机构设定。这些限制通常基于美国政府工业卫生学家会议提出的建议*。破损的温度计、气压计和其他使用汞的仪器溢出的汞蒸汽浓度可能超过这些限值。汞是一种具有高表面张力的重液体,溢出后很容易分散成小液滴,沉积在裂缝和缝隙中。由于这种分散,汞的表面积随之增加,从而提高了周围空气中的汞浓度。使用商用仪器可以轻松测量汞蒸汽浓度。为了监测环境危害,建议定期检查汞暴露在大气中的位置的汞含量。每当发生泄漏时,使用泄漏工具包进行清理。 泄漏和清理后,彻底检查大气中的汞蒸汽浓度*1993年,该会议的总部位于俄亥俄州辛辛那提市格伦威大道6500号D-7号楼,邮编:45211。 1.4 本指南提供了有组织的信息收集或一系列选项,并不推荐具体的行动方案。本文件不能取代教育或经验,应与专业判断一起使用。并非本指南的所有方面都适用于所有情况。本ASTM标准不代表或取代必须根据其判断给定专业服务的充分性的谨慎标准,也不应在不考虑项目的许多独特方面的情况下应用本文件。本文件标题中的“标准”一词仅表示该文件已通过ASTM共识程序获得批准。 ====意义和用途====== 5.1 水在非饱和带中的运动对研究有害物质具有重要意义- 废物处理场 ( 1. , 2. , 3. , 4. ) 3. ; 补给研究 ( 5. , 6. ) ; 灌溉管理 ( 7. , 8. , 9 ) ; 和土木工程项目 ( 10 , 11 ) . 仅矩阵势数据可用于确定流动方向 ( 11 ) 在某些情况下,可以使用多个张力计装置来确定水通量。理论上,该技术可以应用于几乎任何非饱和流情况,无论是补给、排放、侧向流或这些情况的组合。 5.2 如果已知土壤的水分特性曲线,则可以使用矩阵电位数据来确定土壤的近似含水量 ( 10 ) . 标准张力计用于测量0和0之间的矩阵电位 -867厘米的水;该范围包括许多土壤的大多数饱和度值 ( 12 ) . 5.3 张力计直接有效地测量土壤水张力,但需要注意细节。特别是,安装需要在多孔材料和土壤之间建立连续的水力连接,并且对自然渗透模式的干扰最小是成功安装所必需的。 避免空气侵入、仪器不平衡或压力传感器不准确引起的误差将产生可靠的矩阵电位值。 5.4 特殊的张力计设计扩展了张力计的正常功能,允许在寒冷或偏远地区进行测量,测量的基质电位低至 -153米水深(-15巴),在深度为6米(在陆地表面记录)的传统张力计上进行测量,深度可达200米或更高,采用先进的便携式版本( 13 , 14 ),并使用连接到单个压力传感器的多达22个张力计进行自动测量,但这些需要大量的努力和资金投资。 5.5 张力计中常用的压力传感器包括真空计、水银压力计和压力传感器。只有配备压力传感器的张力计才能自动收集大量数据。然而,用户需要意识到压力- 传感器规格,特别是温度灵敏度和长期漂移。现场测量已知零和“满标度”读数可能是最佳校准程序;然而,现场温度测量或实验室定期重新校准可能就足够了。
1.1 This guide covers the measurement of matric potential in the vadose zone using tensiometers. The theoretical and practical considerations pertaining to successful onsite use of commercial and fabricated tensiometers are described. Measurement theory and onsite objectives are used to develop guidelines for tensiometer selection, installation, and operation. 1.2 Units— The values stated in SI units are to be regarded as the standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. The use of a mercury manometer has inherent safety concerns regarding the handling of and potential exposure to mercury. Mercury metal vapor poisoning has long been recognized as a hazard. When using equipment containing or requiring the use of mercury, take all precautions and care to avoid the escape of mercury vapor or the spillage of mercury. Maximum limits for mercury concentrations in industrial atmospheres are set by governmental agencies. These limits are usually based upon recommendations made by the American Conference of Governmental Industrial Hygienists*. It is possible for the concentration of mercury vapors accompanying spills from broken thermometers, barometers, and other instruments using mercury to exceed these limits. Mercury, being a heavy liquid with high surface tension, readily disperses into small droplets after spills, lodging in cracks and crevices. Resultant increased surface area of the mercury due to this dispersion promotes higher mercury concentrations in the surrounding air. Mercury vapor concentrations are readily measured using commercially available instrumentation. To monitor environmental hazards it is advisable to make periodic checks for mercury content at locations where mercury is exposed to the atmosphere. Use a spill kit for clean-up whenever spillage occurs. After spills and clean-up, make thorough checks for mercury vapor concentrations in the atmosphere. *In 1993, this Conference had headquarters located in Building D-7 at 6500 Glenway Drive, Cincinnati, Ohio 45211. 1.4 This guide offers an organized collection of information or a series of options and does not recommend a specific course of action. This document cannot replace education or experience and should be used in conjunction with professional judgment. Not all aspects of this guide may be applicable in all circumstances. This ASTM standard is not intended to represent or replace the standard of care by which the adequacy of a given professional service must be judged, nor should this document be applied without consideration of a project's many unique aspects. The word“ Standard” in the title of this document means only that the document has been approved through the ASTM consensus process. ====== Significance And Use ====== 5.1 Movement of water in the unsaturated zone is of considerable interest in studies of hazardous-waste sites ( 1 , 2 , 3 , 4 ) 3 ; recharge studies ( 5 , 6 ) ; irrigation management ( 7 , 8 , 9 ) ; and civil-engineering projects ( 10 , 11 ) . Matric-potential data alone can be used to determine direction of flow ( 11 ) and, in some cases, quantity of water flux can be determined using multiple tensiometer installations. In theory, this technique can be applied to almost any unsaturated-flow situation whether it is recharge, discharge, lateral flow, or combinations of these situations. 5.2 If the moisture-characteristic curve is known for a soil, matric-potential data can be used to determine the approximate water content of the soil ( 10 ) . The standard tensiometer is used to measure matric potential between the values of 0 and -867 cm of water; this range includes most values of saturation for many soils ( 12 ) . 5.3 Tensiometers directly and effectively measure soil-water tension, but they require care and attention to detail. In particular, installation needs to establish a continuous hydraulic connection between the porous material and soil, and minimal disturbance of the natural infiltration pattern are necessary for successful installation. Avoidance of errors caused by air invasion, nonequilibrium of the instrument, or pressure-sensor inaccuracy will produce reliable values of matric potential. 5.4 Special tensiometer designs have extended the normal capabilities of tensiometers, allowing measurement in cold or remote areas, measurement of matric potential as low as -153 m of water (-15 bars), measurement at depths as deep as 6 m (recorded at land surface) for conventional tensiometers, depths up to 200 m and greater with advanced and portable versions ( 13 , 14 ), and automatic measurement using as many as 22 tensiometers connected to a single pressure transducer, but these require a substantial investment of effort and money. 5.5 Pressure sensors commonly used in tensiometers include vacuum gauges, mercury manometers, and pressure transducers. Only tensiometers equipped with pressure transducers allow for the automated collection of large quantities of data. However, the user needs to be aware of the pressure-transducer specifications, particularly temperature sensitivity and long-term drift. Onsite measurement of known zero and “full-scale” readings probably is the best calibration procedure; however, onsite temperature measurement or periodic recalibration in the laboratory may be sufficient.
分类信息
关联关系
研制信息
归口单位: D18.21
相似标准/计划/法规