作废
ASTM D4700-15
到馆提醒
收藏跟踪
分享链接
购买正版
选择购买版本
本服务由中国标准服务网提供
更多
前往中国标准服务网获取更多购买信息
支持批量购买纸质版标准
Standard Guide for Soil Sampling from the Vadose Zone (Withdrawn 2024)
Vadose区土壤取样标准指南
发布日期:
2015-02-01
废止日期:
2024-01-03
1.1
本指南涵盖了从渗流区(非饱和区)获取土壤样本的程序。可以出于各种原因收集样本,包括以下原因:
1.1.1
地层描述,
1.1.2
导水率测试,
1.1.3
含水量测量,
1.1.4
水分释放曲线构造,
1.1.5
岩土试验,
1.1.6
土壤气体分析,
1.1.7
微生物提取,
1.1.8
孔隙液体评估,或
1.1.9
确定土壤中污染物类型和浓度的实验室化学分析。
1.2
指南
D6169
土壤和岩石取样装置的选择和
D6282
关于环境现场表征的钻探方法,请提供本标准内容的后续补充信息。
1.2.1
直接推动土壤采样(指南
D6282
)和声波钻孔用于现场表征(实践
D6914
)广泛用于渗流区的环境土壤采样。
1.2.1.1
地下勘探按照
D5434
关于地下勘探的测井。
(1)
土芯可能需要使用实践进行处理
D6640
环境勘探用土芯的收集和处理。
1.3
本指南重点介绍为土壤或所含液体或污染物的化学分析提供土壤样本的方法。然而,也包括了关于如何为其他目标修改方法的评论。
1.4
本指南不描述岩化矿床和岩石(例如砂岩、页岩、凝灰岩、花岗岩)的采样方法。
1.5
一般来说,谨慎的做法是在至少两人在场的情况下进行所有现场工作。这提高了安全性并有助于高效的数据收集。
1.6
以英寸-磅为单位的数值应视为标准值。括号中给出的值是到国际单位制的数学转换,仅供参考,不被视为标准值。
1.7
本标准并非旨在解决与其使用相关的所有安全问题(如有)。本标准的用户有责任在使用前制定适当的安全和健康实践,并确定监管限制的适用性。
1.8
本指南提供了有组织的信息收集或一系列选项,并不推荐具体的行动方案。本文件不能取代教育或经验,应与专业判断一起使用。并非本指南的所有方面都适用于所有情况。本ASTM标准不代表或取代必须根据其判断给定专业服务的充分性的谨慎标准,也不应在不考虑项目的许多独特方面的情况下应用本文件。本文件标题中的“标准”一词仅表示该文件已通过ASTM共识程序获得批准。
====意义和用途======
5.1
对渗流区的液体、固体和气体进行化学分析可以提供有关污染物存在、可能来源、迁移路径和物理化学行为的信息。可以根据这些信息制定补救或缓解措施。本指南描述了可用于获取渗流区土壤样本的装置和程序。
5.2
由于第节中所述的原因,土壤采样很有用
1.
. 然而,应该认识到,一般方法具有破坏性,不可能在精确位置重新采样。因此,如果正在设计长期监测方案;应考虑其他获取样品的方法。
注1:
本标准产生的结果的质量取决于执行该标准的人员的能力,以及所用设备和设施的适用性。符合实践标准的机构
D3740
通常认为能够胜任和客观的测试/采样/检查等。本标准的用户应注意遵守惯例
D3740
本身不能确保可靠的结果。可靠的结果取决于许多因素;实践
D3740
提供了一种评估其中一些因素的方法
1.1
This guide covers procedures that may be used for obtaining soil samples from the vadose zone (unsaturated zone). Samples can be collected for a variety of reasons including the following:
1.1.1
Stratigraphic description,
1.1.2
Hydraulic conductivity testing,
1.1.3
Moisture content measurement,
1.1.4
Moisture release curve construction,
1.1.5
Geotechnical testing,
1.1.6
Soil gas analyses,
1.1.7
Microorganism extraction,
1.1.8
Pore liquid evaluation, or
1.1.9
Laboratory chemical analysis identifying contaminant types and concentrations within soils.
1.2
Guides
D6169
on Selection of Soil and Rock Sampling Devices and
D6282
on Drilling methods for Environmental Site Characterization provide subsequent supplemental information to the contents of this standard.
1.2.1
Direct Push Soil Sampling (Guide
D6282
) and Sonic Drilling for Site Characterization (Practice
D6914
) are used extensively for environmental soil sampling in the Vadose zone.
1.2.1.1
Subsurface explorations are documented in accordance with
D5434
on Logging of Subsurface Explorations.
(1)
Soil core may require processing using Practice
D6640
on Collection and Handling of Soil Cores for Environmental Explorations.
1.3
This guide focuses on methods that provide soil samples for chemical analyses of the soil or contained liquids or contaminants. However, comments on how methods may be modified for other objectives are included.
1.4
This guide does not describe sampling methods for lithified deposits and rocks (for example, sandstone, shale, tuff, granite).
1.5
In general, it is prudent to perform all field work with at least two people present. This increases safety and facilitates efficient data collection.
1.6
The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.7
This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
1.8
This guide offers an organized collection of information or a series of options and does not recommend a specific course of action. This document cannot replace education or experience and should be used in conjunction with professional judgment. Not all aspects of this guide may be applicable in all circumstances. This ASTM standard is not intended to represent or replace the standard of care by which the adequacy of a given professional service must be judged, nor should this document be applied without consideration of a project's many unique aspects. The word “Standard” in the title of this document means only that the document has been approved through the ASTM consensus process.
====== Significance And Use ======
5.1
Chemical analyses of liquids, solids, and gases from the vadose zone can provide information on the presence, possible source, migration route, and physical-chemical behavior of contaminants. Remedial or mitigating measures can be formulated based on this information. This guide describes devices and procedures that can be used to obtain vadose zone soil samples.
5.2
Soil sampling is useful for the reasons presented in Section
1
. However, it should be recognized that the general method is destructive, and that resampling at an exact location is not possible. Therefore, if a long term monitoring program is being designed; other methods for obtaining samples should be considered.
Note 1:
The quality of the result produced by this standard is dependent on the competence of the personnel performing it, and the suitability of the equipment and facilities used. Agencies that meet the criteria of Practice
D3740
are generally considered capable of competent and objective testing/sampling/inspection/etc. Users of this standard are cautioned that compliance with Practice
D3740
does not in itself ensure reliable results. Reliable results depend on many factors; Practice
D3740
provides a means of evaluating some of those factors