现行
BS ISO 27913:2016
到馆提醒
收藏跟踪
分享链接
购买正版
选择购买版本
本服务由中国标准服务网提供
更多
前往中国标准服务网获取更多购买信息
支持批量购买纸质版标准
Carbon dioxide capture, transportation and geological storage. Pipeline transportation systems
二氧化碳捕获、运输和地质储存 管道运输系统
BS ISO 27913:2016规定了现有管道中未涵盖的其他要求和建议
将CO2流从捕集场输送至储存设施的标准
主要储存在地质构造中或用于其他目的(例如用于提高采收率或二氧化碳利用)。本文件适用于torigid金属管道、管道系统、输送CO2流的陆上和海上管道、输送CO2流的现有管道转换、储存或利用CO2流的管道输送以及气态和密相CO2的输送。捕获和运输之间的系统边界(见图1)是入口阀处的点
在管道中,CO2流的成分、温度和压力在一定范围内
捕获过程或过程规定的范围,以满足运输要求
本文对此进行了描述。运输和储存之间的边界是二氧化碳流离开地面的点
运输管道基础设施和进入存储基础设施。本文件还包括CO2流质量保证的各个方面,以及汇聚CO2
来自不同来源的溪流。考虑了CO2运输和监测的健康、安全和环境方面。交叉引用:ISO 3183:2012ISO 20765-2ISO 13623ISO 15156-1ISO 16708ISO 17776ISO 31000ISO/TR 27912EN 1594AS 2885 ASME B31。4ASME B31GCSA Z662-2015DNV-RP-J202DNV-OS-F101DNV-RP-C203DNV-RP-F107DNV-RP-F116NACE MR0175-1ISO 15156NACE/TM 0192-2003ACE/TM 0297-
2002年ORSOK Z-013购买本文件时提供的所有当前修订版均包含在购买本文件中。
BS ISO 27913:2016 specifies additional requirements and recommendations not covered in existing pipeline
standards for the transportation of CO2 streams from the capture site to the storage facility where it is
primarily stored in a geological formation or used for other purposes (e.g. for EOR or CO2 use).This document applies torigid metallic pipelines,pipeline systems,onshore and offshore pipelines for the transportation of CO2 streams,conversion of existing pipelines for the transportation of CO2 streams,pipeline transportation of CO2 streams for storage or utilization, andtransportation of CO2 in the gaseous and dense phases.The system boundary (see Figure 1) between capture and transportation is the point at the inlet valve
of the pipeline, where the composition, temperature and pressure of the CO2 stream is within a certain
specified range by the capture process or processes to meet the requirements for transportation as
described in this document.The boundary between transportation and storage is the point where the CO2 stream leaves the
transportation pipeline infrastructure and enters the storage infrastructure.This document also includes aspects of CO2 stream quality assurance, as well as converging CO2
streams from different sources.Health, safety and environment aspects specific to CO2 transport and monitoring are considered.Cross References:ISO 3183:2012ISO 20765-2ISO 13623ISO 15156-1ISO 16708ISO 17776ISO 31000ISO/TR 27912EN 1594AS 2885ASME B31.4ASME B31GCSA Z662-2015DNV-RP-J202DNV-OS-F101DNV-RP-C203DNV-RP-F107DNV-RP-F116NACE MR0175-1ISO 15156NACE/TM 0192-2003NACE/TM 0297-2002NORSOK Z-013All current amendments available at time of purchase are included with the purchase of this document.