1.1 本指南介绍了修复由尺寸石材建造或饰面的立面的材料和程序。所有材料、程序和原则都适用于历史和非历史建筑的修复。 1.2 尽管许多材料和程序可能适合室内使用，但本指南并非旨在解决室内尺寸石材的修复问题。 1.3 单位- 以英寸磅为单位的数值应视为标准。括号中给出的值是国际单位制的数学转换，仅供参考，不被视为标准。 1.4 本标准并非旨在解决与其使用相关的所有安全问题（如有）。本标准的使用者有责任在使用前制定适当的安全、健康和环境实践，并确定监管限制的适用性。 1.5 本国际标准是根据世界贸易组织技术性贸易壁垒委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认的标准化原则制定的。 ====意义和用途====== 4.1 本指南的目的是帮助那些希望恢复由尺寸石头建造或完成的立面的人。它是对业主、建筑经理、建筑师、工程师、承包商和其他参与恢复尺寸石头的人的帮助。 4.2 本指南并不旨在取代制造商关于使用其特定产品的指示和建议，或建筑师或建筑业主的书面指示。当制造商的指示与本指南相冲突时，请遵循他们的建议或咨询他们的技术人员以获得进一步的指示。 4.3 在进行全面维修或清洁程序之前，应在不易看到的区域或石头样本上测试正在考虑的维修、修补或清洁方法。该测试将有助于判断所选方法的有效性，并允许评估建筑石材的潜在损坏。在进行全面清洁或维修程序之前，对样品维修的成功进行全面评估。

1.1 This guide describes materials and procedures for restoring facades constructed of or finished with dimension stone. All of the materials, procedures, and principles are suitable for restoration of historic and nonhistosric structures. 1.2 This guide is not intended to address restoration of interior dimension stone, although many of the materials and procedures may be suitable for interior use. 1.3 Units— The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ====== 4.1 The purpose of this guide is to assist those who wish to restore facades constructed of or finished with dimension stone. It is an aid to owners, building managers, architects, engineers, contractors and others involved with restoring dimension stone. 4.2 This guide is not meant to supersede manufacturers' directions and recommendations for the use of their specific products, or written directions from the architect or building owner. When manufacturers' directions are in conflict with this guide, follow their recommendations or consult with their technical staff for further direction. 4.3 Prior to undertaking a full-scale repair or cleaning procedure, the methods under consideration for repair, patching or cleaning should be tested on an area not easily visible or on sample stones. The test will assist in judging the effectiveness of the chosen method and permit assessment of potential damage to the building stone. Completely evaluate the success of the sample repairs before undertaking the full-scale cleaning or repair procedure.