本设计标准规定了混凝土结构的设计和细节要求。这些章节一般是根据现象来安排的。规范性文本包括原则（条款编号后用P标识）和应用规则。这些原则适用于所有混凝土结构。该规范还包含了建筑结构的特殊规则。本规范采用极限状态设计理念，涵盖了普遍适用的极限状态。许多国家确定的参数可以满足安全因素以及整个欧洲不同的地理、地质和气候条件。该准则代表了欧洲约28个国家的最新知识和经验。与EN 1990、EN 1991、EN 1997、EN 1998、ENV 13670对照阅读:EN 1990 EN 1991-1-5EN 1991- 1-6EN 1997EN 1998EN 197-1EN 206-1EN 12390EN 10080EN 10138EN ISO 17760ENV 13670EN 13791EN ISO 15630也作为套件184的一部分提供。替换BS 8110第1至3部分、DD ENV 1992第1-1部分和第1-3至1-6部分。包含以下内容:勘误表，2008年6月。勘误表，2011年8月。勘误表，2014年2月。修正案，2015年7月。修订并替换BS EN 1992-1-1:2004

This design standard provides requirements for design and detailing of concrete structures. The chapters are laid out generally on the basis of phenomena. The normative text comprises principles (identified with P after the clause number) and application rules. The principles apply to all concrete structures. The code also incorporates particular rules for building structures. The code uses limit state design philosophy and covers the commonly applicable limit states. A number of nationally determined parameters are allowed to cater for safety factors and for the differing geographical, geological and climatic conditions throughout Europe. The code represents the up-to-date knowledge and experience of some 28 countries across Europe. To be read in conjunction with EN 1990,EN 1991,EN 1997,EN 1998,ENV 13670Cross References:EN 1990EN 1991-1-5EN 1991-1-6EN 1997EN 1998EN 197-1EN 206-1EN 12390EN 10080EN 10138EN ISO 17760ENV 13670EN 13791EN ISO 15630Also available as part of KIT 184.Replaces BS 8110 Parts 1 to 3, DD ENV 1992 Parts 1-1 and Parts 1-3 to 1-6.Incorporates the following:Corrigendum, June 2008. Corrigendum, August 2011. Corrigendum, February 2014. Amendment, July 2015. Amends and replaces BS EN 1992-1-1:2004