首页 馆藏资源 标准快讯 标准数字化 呈缴征集 标准服务 关于我们
现行 ASTM E1925-25
到馆提醒
收藏跟踪
购买正版
Specification for Engineering and Design Criteria for Rigid Wall Relocatable Structures 刚性壁可移动结构的工程和设计标准规范
发布日期: 2025-08-01
1.1 本规范涵盖了刚性壁可重新定位结构(RWRS)开发所需的工程和设计标准,并应适用于可扩展和不可扩展RWRS的设计。本规范适用于有效RWRSE的当前工程和设计要求,所述RWRSE可在各种环境中操作而不会退化,并且能够执行所有指定的运输模式。本规范应适用于可扩展和不可扩展RWRSE的设计。本规范是国防部所有部门和机构批准的军用标准的转换。 1.2 以英寸-磅单位表示的值应被视为标准值。括号中给出的值是对SI单位的数学转换,仅供参考,不被视为标准。1.3 以下安全隐患警告仅适用于测试要求部分,章节 10 ,本说明书的。 本说明书并不旨在解决与其使用相关的所有安全性问题(如果有的话)。本规范的使用者有责任在使用前建立适当的安全、健康和环境实践并确定法规限制的适用性。 1.4 本国际标准是根据世界贸易组织技术性贸易壁垒(TBT)委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认的标准化原则制定的。
1.1 This specification covers engineering and design criteria required for the development of rigid wall relocatable structures (RWRS) and shall be applied to the design of expandable and nonexpandable RWRSes. This specification applies to present engineering and design requirements for effective RWRSes that are operable in a variety of environments without degradation and are capable of all specified transport modes. This specification shall be applied to the design of expandable and nonexpandable RWRSes. This specification is a conversion of a military standard that was approved by all departments and agencies of the Department of Defense. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 The following safety hazards caveat pertains only to the test required portion, Section 10 , of this specification. This specification does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this specification to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
分类信息
关联关系
研制信息
归口单位: E06.53
相似标准/计划/法规