BS ISO 19354:2016规定了金属结构船用起重机的一般要求。本文件适用于以下类型的船用起重机:安装在船舶上的甲板起重机，用于在港口或遮蔽水域装卸货物或集装箱 条件安装在驳船或浮筒上的浮式起重机或抓斗起重机，用于在港口条件下作业；安装在船舶（包括浮动码头）上的机舱起重机和供应起重机等 港口条件下的装卸设备和仓库。注:其他类型的船用起重机可参考本文件。本文件不适用于以下情况:最低环境工作温度低于-20°C；最高环境工作温度高于+45°C；事故或碰撞产生的载荷；海平面以下的起重作业； 起重机的运输、组装、拆卸和退役；起重配件，即起重机和负载之间的任何物品；涉及多台起重机的起重作业；手动起重机；紧急救援行动；岸边货物装卸起重机；船上的便携式起重机；救生艇、救生筏、舷梯和引航员舷梯的起重装置；救生艇和救援艇的下水装置；舷梯、起居舱和引航员梯及其装卸设备。交叉引用:ISO 4301-4ISO 4413ISO 4414ISO 8501-1ISO 8502-3ISO 8503-1ISO 12944-2ISO 12944-5ISO 16855ISO 16856ISO 16857ISO 16858ISO 19355ISO 19356ISO 19359ISO 19360IEC 60034IEC 60204-32IEC 61892ISO 898-1ISO 3828ISO 4306-1ISO 8431购买本文件时提供的所有当前修订版均包含在购买本中。

BS ISO 19354:2016 specifies the general requirements for marine cranes of metal construction.This document is applicable to the following types of marine cranes:deck cranes mounted on ships for handling cargo or containers in harbour or sheltered water conditions;floating cranes or grab cranes mounted on barges or pontoons for operating in harbour conditions;engine room cranes and provision cranes, etc. mounted on ships (including floating docks) for handling equipment and stores in harbour conditions.NOTE Marine cranes in other types can refer to this document.This document is not applicable to the following:minimum ambient operating temperatures below -20 °C;maximum ambient operating temperatures above +45 °C;loads from accidents or collisions;lifting operations below sea level;transport, assembly, dismantling and decommissioning of cranes;lifting accessories, i.e. any item between the crane and the load;lifting operations involving more than one crane;hand-powered cranes;emergency rescue operations;shore-side cargo handling cranes;portable cranes on board;lifting appliances for lifeboats, liferafts accommodation ladders, and pilot ladders;launching appliances for survival craft and rescue boats;gangways, accommodation and pilot ladders and their handling appliances.Cross References:ISO 4301-4ISO 4413ISO 4414ISO 8501-1ISO 8502-3ISO 8503-1ISO 12944-2ISO 12944-5ISO 16855ISO 16856ISO 16857ISO 16858ISO 19355ISO 19356ISO 19359ISO 19360IEC 60034IEC 60204-32IEC 61892ISO 898-1ISO 3828ISO 4306-1ISO 8431All current amendments available at time of purchase are included with the purchase of this document.