请注意:此版本的所有临时修订版将在您购买时提供。这些要求包括车间制造的、地上大气耐火储罐，用于储存稳定的易燃或可燃液体，这些液体具有 比重不大于1.0，且与储罐的材料和结构兼容。当结构暴露于2小时碳氢化合物池火灾时，这些储罐结构旨在限制传递到主储罐的热量。坦克 通过产品标记进行适当标识，以保护主油箱免受抛射物冲击和车辆冲击。根据《易燃和可燃液体规范》、NFPA 30和 汽车和船用加油站代码，NFPA 30A。这些要求涵盖的储罐在出厂前作为完全组装的单元进行制造、检查和泄漏测试。这些要求和测试不是为了确定一个储罐？s在火灾暴露、车辆碰撞或抛射物碰撞后使用的可接受性。这些要求不涉及可能需要的锚定方法，以防止因风或地震力引起的洪水或移动引起的隆起。这些要求不涉及梯子、楼梯、跑道、护栏、平台或设备支架的施工或连接方式。包含新特性、特性、组件、材料或系统的产品，或与本大纲要求涵盖的产品不同的产品，以及 涉及火灾、触电或人身伤害的风险，应使用确定的适当附加组件和最终产品要求进行评估 为保持本大纲意图最初预期的可接受安全水平所必需的。一种产品，其特征、特性、组件， 与本大纲的具体要求或规定相冲突的材料或系统不能被判定为符合本大纲。

Please note: All interim revisions for this edition available at time of your purchase will be included.These requirements cover shop fabricated, aboveground atmospheric Fire Resistant Tanks intended for storage of stable flammable or combustible liquids that have a specific gravity not greater than 1.0 and that are compatible with the material and construction of the tank.These tank constructions are intended to limit the heat transferred to the primary tank when the construction is exposed to a 2-hour hydrocarbon pool fire. Tanks appropriately identified by product markings provide protection for the primary tank against projectile impact and vehicle impact.Fire Resistant Tanks are intended for stationary installation and use in accordance with the Flammable and Combustible Liquids Code, NFPA 30, and the Automotive and Marine Service Station Code, NFPA 30A.Tanks covered by these requirements are fabricated, inspected, and tested for leakage before shipment from the factory as completely assembled units.These requirements and tests are not intended to determine a tank?s acceptability for use after fire exposure, vehicle impact, or projectile impact.These requirements do not address methods of anchoring which may be required to prevent uplift from flooding or movement due to wind or seismic forces.These requirements do not address either the construction, or attachment means of ladders, stairs, runways, guardrails, platforms, or equipment supports.A product that contains features, characteristics, components, materials, or systems new or different from those covered by the requirements in this outline, and that involves a risk of fire, electric shock, or injury to persons shall be evaluated using the appropriate additional component and end-product requirements as determined necessary to maintain the acceptable level of safety as originally anticipated by the intent of this outline. A product whose features, characteristics, components, materials, or systems conflict with specific requirements or provisions of this outline cannot be judged to comply with this outline.