首页 馆藏资源 标准快讯 标准数字化 呈缴征集 标准服务 关于我们
作废 ASTM D2751-05
到馆提醒
收藏跟踪
购买正版
Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Sewer Pipe and Fittings (Withdrawn 2014) 丙烯腈 - 丁二烯 - 苯乙烯(ABS)下水管和配件的标准规格(2014年撤回)
发布日期: 2005-05-01
废止日期: 2014-01-14
1.1本规范涵盖通过单次挤出或同时多次共挤生产的丙烯腈-丁二烯-苯乙烯(ABS)污水管。本规范还包括配件。包括材料、尺寸、工艺、耐化学性、耐水性和接缝紧密性的要求和测试方法。还包括表明符合本规范的标记形式。 1.2本规范的文本引用了提供解释性材料的注释、脚注和附录。这些注释和脚注(不包括表和图中的注释和脚注)不应视为本规范的要求。 以下预防性警告仅适用于本规范试验方法部分第节: 本标准并非旨在解决与其使用相关的所有安全问题(如有)。本标准的用户有责任在使用前制定适当的安全和健康实践,并确定监管限制的适用性。
1.1 This specification covers acrylonitrile-butadienestyrene (ABS) sewer pipe, produced by single extrusion or simultaneous multiple coextrusion. This specification also covers fittings. Included are requirements and test methods for materials, dimensions, workmanship, chemical resistance, water resistance, and joint tightness. A form of marking to indicate compliance with this specification is also included. 1.2 The text of this specification references notes, footnotes, and appendixes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the specification. The following precautionary caveat pertains only to the test methods portion, Section, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
分类信息
关联关系
研制信息
归口单位: F17.62
相似标准/计划/法规
现行
ASTM D2680-20(2025)
Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping
丙烯腈 - 丁二烯 - 苯乙烯(ABS)和聚(氯乙烯)(PVC)复合污水管道的标准规范
2025-08-01
现行
ASTM F2969-26
Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) IPS Dimensioned Pressure Pipe
丙烯腈 - 丁二烯 - 苯乙烯(ABS)IPS尺寸压力管的标准规范
2026-10-01
现行
ASTM D2235-22
Standard Specification for Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe and Fittings
丙烯腈-丁二烯-苯乙烯(ABS)塑料管和配件用溶剂水泥的标准规范
2022-07-01
现行
ASTM F2806-23
Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (Metric SDR-PR)
丙烯腈-丁二烯-苯乙烯(ABS)塑料管(公制SDR-PR)
2023-02-01
现行
QB/T 5621-2021
回收和再生丙烯腈-丁二烯-苯乙烯共聚物(ABS)分级技术规范
Technical specification for cassification of recycled and reworked acrylonitrile- butadiene styrene copolymer(ABS)
2021-08-21
现行
T/CPCIF 0125-2021
绿色设计产品评价技术规范 丙烯腈-丁二烯-苯乙烯(ABS)树脂
Technical specification for green-design product assessment— Acrylonitrile-butadiene-styrene (ABS) resin
2021-07-01
现行
ISO 7245-1984
Pipes and fittings of acrylonitrile/butadiene/styrene (ABS) — General specification for moulding and extrusion materials
丙烯腈/丁二烯/苯乙烯(ABS)和mdash的管道和配件;模塑和挤压材料通用规范
1984-11-01
现行
ASTM D3965-21
Standard Classification System and Basis for Specifications for Rigid Acrylonitrile-Butadiene-Styrene (ABS) Materials for Pipe and Fittings
管道和配件用刚性丙烯腈-丁二烯-苯乙烯(ABS)材料的标准分类系统和规范基础
2021-09-01
现行
BS EN ISO 19062-1-2015
Plastics. Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials-Designation system and basis for specifications
塑料 丙烯腈-丁二烯-苯乙烯(ABS)模塑和挤出材料
2015-12-31
现行
ASTM D4673-23
Standard Classification System for and Basis for Specification for Acrylonitrile–Butadiene–Styrene (ABS) Plastics and Alloys Molding and Extrusion Materials
丙烯腈-丁二烯-苯乙烯(ABS)塑料和合金模塑和挤压材料的标准分类系统和规范基础
2023-01-01
现行
ASTM D2661-24
Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings
丙烯腈-丁二烯-苯乙烯(ABS)表40塑料排水、废水和通风管及配件的标准规范
2024-07-01
现行
ASTM F628-24
Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe With a Cellular Core
丙烯腈 - 丁二烯 - 苯乙烯(ABS)的标准规范附表40具有蜂窝芯的塑料排水 废物和排气管
2024-09-01
现行
T/CASME 1581-2024
聚碳酸酯/丙烯腈-丁二烯-苯乙烯(PC/ABS)低压智能电能计量箱通用规范
General specification for polycarbonate/acrylonitrile butadiene styrene (PC/ABS) low-voltage intelligent energy metering boxes
2024-07-09
现行
ISO 19062-1-2015
Plastics — Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials — Part 1: Designation system and basis for specifications
塑料 - 丙烯腈 - 丁二烯 - 苯乙烯(Abs)成型和挤出材料 - 第1部分:指定系统和规格
2015-11-06
现行
GB/T 20417.1-2025
塑料 丙烯腈-丁二烯-苯乙烯(ABS)模塑和挤出材料 第1部分:命名系统和分类基础
Plastics—Acrylonitrile-butadiene-styrene(ABS) moulding and extrusion materials—Part 1: Designation system and basis for specifications
2025-12-02
现行
DIN EN 18064-7-2026-04
Kunststoffe - Qualittsempfehlungen und Grundlagen fr Spezifikationen fr die Verwendung von Kunststoffrezyklaten in Produkten - Teil 7: Acrylnitril-Butadien-Styrol (ABS)
塑料 产品中塑料回收物应用规范的质量建议和依据 第7部分:丙烯腈-丁二烯-苯乙烯(ABS)
2026-04-01
现行
KS M ISO 19062-1
플라스틱 ㅡ 아크릴로니트릴/부타디엔/스티렌(ABS) 성형 및 압출재료 ㅡ 제1부: 호칭체계 및 시방의 기본
塑料SUL丙烯腈 - 丁二烯 - 苯乙烯(ABS)模塑和挤塑材料SUL第1部分:规格命名系统和基本
2017-02-07
现行
KS M ISO 19062-1(2022 Confirm)
플라스틱 ㅡ 아크릴로니트릴/부타디엔/스티렌(ABS) 성형 및 압출재료 ㅡ 제1부: 호칭체계 및 시방의 기본
塑料ㅡ 丙烯腈-丁二烯-苯乙烯(ABS)模塑和挤出材料ㅡ 第1部分:命名系统和规范基础
2017-02-07
现行
KS M ISO 19062-1(2022 Confirm)
플라스틱 ㅡ 아크릴로니트릴/부타디엔/스티렌(ABS) 성형 및 압출재료 ㅡ 제1부: 호칭체계 및 시방의 기본
塑料ㅡ 丙烯腈-丁二烯-苯乙烯(ABS)模塑和挤出材料ㅡ 第1部分:命名系统和规范基础
2017-02-07
现行
ASTM D3138-21
Standard Specification for Solvent Cements for Transition Joints Between Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Non-Pressure Piping Components
丙烯腈-丁二烯-苯乙烯(ABS)和聚氯乙烯(PVC)非压力管道部件之间过渡接头用溶剂粘合剂的标准规范
2021-11-01