现行
ASTM E1049-85(2023)
到馆提醒
收藏跟踪
分享链接
购买正版
选择购买版本
本服务由中国标准服务网提供
电子版
英语/个人电子版/1-2个工作日发邮件/有水印
¥ 648
更多
前往中国标准服务网获取更多购买信息
支持批量购买纸质版标准
Standard Practices for Cycle Counting in Fatigue Analysis
疲劳分析中循环计数的标准实施规程
1.1
这些实践是疲劳分析中使用的循环计数方法的可接受程序的汇编。本标准无意推荐特定的方法。
1.2
本标准并不旨在解决与其使用相关的所有安全问题(如有)。本标准的使用者有责任在使用前制定适当的安全、健康和环境实践,并确定监管限制的适用性。
1.3
本国际标准是根据世界贸易组织技术性贸易壁垒委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认的标准化原则制定的。
====意义和用途======
4.1
循环计数用于总结(通常是长时间的)不规则负载-
通过提供各种大小的循环发生的次数来与时间历史进行比较。循环的定义随循环计数方法的不同而不同。这些实践涵盖了通过各种方法获得周期计数的程序,包括水平交叉计数、峰值计数、简单范围计数、范围对计数和雨流计数。可以对力、应力、应变、扭矩、加速度、挠度或其他感兴趣的载荷参数的时间历程进行循环计数。
1.1
These practices are a compilation of acceptable procedures for cycle-counting methods employed in fatigue analysis. This standard does not intend to recommend a particular method.
1.2
This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.3
This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
====== Significance And Use ======
4.1
Cycle counting is used to summarize (often lengthy) irregular load-versus-time histories by providing the number of times cycles of various sizes occur. The definition of a cycle varies with the method of cycle counting. These practices cover the procedures used to obtain cycle counts by various methods, including level-crossing counting, peak counting, simple-range counting, range-pair counting, and rainflow counting. Cycle counts can be made for time histories of force, stress, strain, torque, acceleration, deflection, or other loading parameters of interest.