首页 馆藏资源 标准快讯 标准数字化 呈缴征集 标准服务 关于我们
作废 ASTM F789-95a
到馆提醒
收藏跟踪
购买正版
Standard Specification for Type PS-46 and Type PS-115 Poly(Vinyl Chloride) (PVC) Plastic Gravity Flow Sewer Pipe and Fittings (Withdrawn 2004) PS-46型和PS-115型聚氯乙烯(PVC)塑料重力流下水道管件及配件标准规范(撤回2004)
发布日期: 1995-10-10
废止日期: 2004-07-20
1.1本规范涵盖了材料、尺寸、工艺、抗压扁性、抗冲击性、管道刚度、挤压质量、连接系统的要求和测试方法,以及PS-46型和PS-115型聚氯乙烯塑料重力流污水管的标记形式,最小管道刚度分别为46 psi(320 kPa)和115 psi(790 kPa),和配件。 1.2根据本规范生产的管道和管件应按照规程D2321进行安装。 1.3以英寸-磅为单位的数值应视为标准值。括号中给出的值仅供参考。 1.4以下预防性警告仅适用于本规范第8节试验方法部分:本标准无意解决与其使用相关的所有安全问题(如有)。本标准的用户有责任在使用前制定适当的安全和健康实践,并确定监管限制的适用性。
1.1 This specification covers requirements and test methods for materials, dimensions, workmanship, flattening resistance, impact resistance, pipe stiffness, extrusion quality, joining systems, and a form of marking for Type PS-46 and Type PS-115 poly(vinyl chloride) (PVC) plastic, gravity flow sewer pipe having a minimum pipe stiffness of 46 psi (320 kPa) and 115 psi (790 kPa), respectively, and fittings. 1.2 Pipe and fittings produced to this specification shall be installed in accordance with Practice D2321. 1.3 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are provided for information purposes only. 1.4 The following precautionary caveat pertains only to the test method portion, Section 8, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
分类信息
关联关系
研制信息
归口单位: F17.62
相似标准/计划/法规