本文件规定了船用起重机的操作和维护要求，包括电液缸变幅起重机、电液钢丝绳变幅起重机和电动钢丝绳变幅起重机。 本文件适用于在港口或遮蔽水域条件下运行的下列类型的船用起重机:-安装在船舶上的甲板起重机，用于在港口或遮蔽水域条件下搬运设备、货物或集装箱；-安装在驳船或浮筒上的浮式起重机，用于在港口或隐蔽水域装卸货物安装在船舶、驳船或浮筒上的抓斗起重机，用于在港口或隐蔽水域条件下作业机舱、仓库、起重机等安装在船舶上，用于在港口或隐蔽水域条件下搬运设备和仓库。 对于上述描述未涵盖的其他船用起重机或其他环境条件，可参考本文件。 交叉引用:ISO 4306-1ISO 3828ISO 9928-1ISO 19355EN 12644-1ISO 9927-1ISO 19360ISO 12100ISO 4301-4ISO 19354ISO 4310ISO 19356ISO 12478-1购买本文件时提供的所有当前修订版均包含在购买本文件中。

This document specifies the operation and maintenance requirements of marine cranes, including electro-hydraulic cylinder luffing cranes, electro-hydraulic wire rope luffing cranes and electric wire rope luffing cranes. This document is applicable to the following types of marine cranes operating in harbour or sheltered water conditions:— deck cranes mounted on ships for handling equipment, cargo or containers in harbour or sheltered water conditions;— floating cranes mounted on barges or pontoons for handling loads in harbour or sheltered water conditions;— grab cranes mounted on ships, barges or pontoons for operating in harbour or sheltered water conditions;— engine room, stores cranes, etc. mounted on ships for handling equipment and stores in harbour or sheltered water conditions. For other marine cranes not covered by the above descriptions or for other environmental conditions this document can be referred.Cross References:ISO 4306-1ISO 3828ISO 9928-1ISO 19355EN 12644-1ISO 9927-1ISO 19360ISO 12100ISO 4301-4ISO 19354ISO 4310ISO 19356ISO 12478-1All current amendments available at time of purchase are included with the purchase of this document.