首页 馆藏资源 标准快讯 标准数字化 呈缴征集 标准服务 关于我们
历史 ASTM E739-91(1998)
到馆提醒
收藏跟踪
购买正版
Standard Practice for Statistical Analysis of Linear or Linearized Stress-Life (S-N) and Strain-Life (e-N) Fatigue Data 线性或线性应力寿命(S-N)和应变寿命(e-N)疲劳数据的统计分析的标准实施规程
发布日期: 1998-04-10
1.1本规程仅适用于S-N和e-N关系,这些关系可以通过特定应力或应变间隔的直线(在适当坐标上)合理近似。它介绍了目前反映建模和分析良好实践的基本程序。然而,由于实际的S-N或e-N关系仅在特定的应力或应变间隔内用直线近似,并且由于实际疲劳寿命分布未知,因此不建议(a)S-N或e-N关系- N或e-N曲线可在试验间隔外外推,或(b)特定应力或应变幅度下的疲劳寿命估计约低于第五个百分位(P[相似]0.05)。随着替代疲劳模型和统计分析的不断开发,本规程的后续修订可能会提供分析,以更完整地解释S-N和e-N数据。
1.1 This practice pertains only to S-N and e-N relationships that may be reasonably approximated by a straight line (on appropriate coordinates) for a specific interval of stress or strain. It presents elementary procedures that presently reflect good practice in modeling and analysis. However, because the actual S-N or e-N relationship is approximated by a straight line only within a specific interval of stress or strain, and because the actual fatigue life distribution is unknown, it is not recommended that (a) the S-N or e-N curve be extrapolated outside the interval of testing, or (b) the fatigue life at a specific stress or strain amplitude be estimated below approximately the fifth percentile (P [similar] 0.05). As alternative fatigue models and statistical analyses are continually being developed, later revisions of this practice may subsequently present analyses that permit more complete interpretation of S-N and e-N data.
分类信息
关联关系
研制信息
归口单位: E08.04
相似标准/计划/法规