作废
ASTM A1042/A1042M-04(2009)
到馆提醒
收藏跟踪
分享链接
购买正版
选择购买版本
本服务由中国标准服务网提供
更多
前往中国标准服务网获取更多购买信息
支持批量购买纸质版标准
Standard Specification for Composite Corrugated Steel Pipe for Sewers and Drains (Withdrawn 2015)
复合波纹钢管的标准规范下水道和排水管(撤回2015)
发布日期:
2009-11-01
废止日期:
2015-06-02
1.1本规范涵盖复合波纹钢管,拟用于雨水排放、卫生下水道、地下排水沟、涵洞施工和类似用途。用于制造管道的复合材料由钢板芯两侧的三层聚合物保护涂层组成。这三层由钢表面的熔结环氧树脂内层、聚乙烯粘合剂中间层和高密度聚乙烯外层组成。
1.2三层聚合物涂层保护基底金属免受腐蚀或磨损,或两者兼而有之。除非提供补充保护,否则恶劣环境可能会导致附件(如耦合带硬件)出现腐蚀问题。如规范所述,在管道制造后,可使用涂层对复合钢管进行额外保护
A849
.
1.
3本规范不包括垫层、回填或覆土荷载与管道板厚之间关系的要求。排水产品的经验表明,成功的性能取决于波纹轮廓、板材厚度、垫层和回填类型的正确选择、工厂的受控制造以及安装过程中的小心。安装程序在实践中进行了描述
A798/A798M
.
1.4本规范适用于A1042英寸磅单位或A1042M国际单位的订单。英寸磅单位和国际单位不一定相等。为清楚起见,文本中的括号中显示了国际单位制,但当材料订购至A1042M时,它们是适用的值。
1.5
本标准并非旨在解决与其使用相关的所有安全问题(如有)。本标准的用户有责任在使用前制定适当的安全和健康实践,并确定监管要求的适用性。
1.1 This specification covers composite corrugated steel pipe, intended for uses such as storm water drainage, sanitary sewers, underdrains, construction of culverts, and similar uses. The composite material used in fabrication of the pipe consists of a three-layer polymer protective coating on both sides of a steel sheet core. The three layers consist of an inner layer of fusion-bonded epoxy on the steel surface, an intermediate layer of polyethylene adhesive, and an outer layer of high-density polyethylene.
1.2 The three-layer polymer coating protects the base metal against corrosion or abrasion, or both. Severe environments are likely to cause corrosion problems to accessory items such as coupling band hardware unless supplemental protection is provided. Additional protection for composite steel pipe is available by use of coatings applied after fabrication of the pipe as described in Specification
A849
.
1.3 This specification does not include requirements for bedding, backfill, or the relationship between earth cover load and sheet thickness of the pipe. Experience with drainage products has shown that successful performance depends upon the proper selection of corrugation profile, sheet thickness, type of bedding and backfill, controlled manufacture in the plant, and care in installation. The installation procedure is described in Practice
A798/A798M
.
1.4 This specification is applicable to orders in either inch-pound units as A1042, or in SI units as A1042M. Inch-pound units and SI units are not necessarily equivalent. SI units are shown in brackets in the text for clarity, but they are the applicable values when the material is ordered to A1042M.
1.5
This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use.