首页 馆藏资源 标准快讯 标准数字化 呈缴征集 标准服务 关于我们
历史 ASTM E1049-85(2005)
到馆提醒
收藏跟踪
购买正版
Standard Practices for Cycle Counting in Fatigue Analysis 疲劳分析循环计数的标准实践
发布日期: 2005-06-01
1.1这些规程是疲劳分析中使用的循环计数方法的可接受程序汇编。本标准无意推荐特定方法。 1.2 本标准并非旨在解决与其使用相关的所有安全问题(如有)。本标准的用户有责任在使用前制定适当的安全和健康实践,并确定监管限制的适用性。 ====意义和用途====== 通过提供各种大小的循环次数,循环计数用于总结(通常很长)不规则负载与时间历程。 周期的定义因周期计数方法而异。这些实践包括通过各种方法获得周期计数的程序,包括平交计数、峰值计数、简单范围计数、范围对计数和雨流计数。可以对力、应力、应变、扭矩、加速度、挠度或其他相关负载参数的时间历程进行循环计数。
1.1 These practices are a compilation of acceptable procedures for cycle-counting methods employed in fatigue analysis. This standard does not intend to recommend a particular method. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. ====== Significance And Use ====== Cycle counting is used to summarize (often lengthy) irregular load-versus-time histories by providing the number of times cycles of various sizes occur. The definition of a cycle varies with the method of cycle counting. These practices cover the procedures used to obtain cycle counts by various methods, including level-crossing counting, peak counting, simple-range counting, range-pair counting, and rainflow counting. Cycle counts can be made for time histories of force, stress, strain, torque, acceleration, deflection, or other loading parameters of interest.
分类信息
关联关系
研制信息
归口单位: E08.04
相似标准/计划/法规