历史
ASTM A1113/A1113M-20e1
到馆提醒
收藏跟踪
分享链接
购买正版
选择购买版本
本服务由中国标准服务网提供
电子版
英语/个人电子版/1-2个工作日发邮件/有水印
¥ 864
更多
前往中国标准服务网获取更多购买信息
支持批量购买纸质版标准
Standard Specification for Corrugated Steel Structural Plate, Polymer-Coated, for Field-Bolted Pipe, Pipe-Arches, and Arches
现场螺栓连接管、管拱和拱用聚合物涂层波纹钢结构板的标准规范
1.1
本规范涵盖聚合物涂层波纹钢结构板,用于建造管道、管拱、拱门、地下通道和现场组装的特殊形状。还描述了适当的紧固件和附件材料。管道、拱门和其他形状通常用于排水、行人和车辆地下通道以及综合管廊。
1.2
本规范不包括垫层、回填或覆土荷载与管道板厚度之间关系的要求。经验表明,该产品的成功性能取决于板材厚度、垫层和回填类型的正确选择、工厂制造以及安装过程中的小心。买方必须将上述因素以及现场安装的腐蚀和磨损要求与板材厚度相关联。
实践中介绍了波纹钢结构板管的结构设计和正确的安装程序
A796/A796M
和
A807/A807M
.
1.3
单位-
本规范适用于英寸-磅单位(如A1113)或国际单位(如A1113M)的订单。英寸磅单位和国际单位不一定相等。国际单位制显示在文本中的括号中,但当材料订购至A1113M时,它们是适用的值。
1.4
本规范引用了提供解释材料的注释和脚注。这些注释和脚注(不包括表和图中的注释和脚注)不应视为本规范的要求。
1.5
本标准并非旨在解决与其使用相关的所有安全问题(如有)。本标准的用户有责任在使用前制定适当的安全、健康和环境实践,并确定监管限制的适用性。
1.6
本国际标准是根据世界贸易组织技术性贸易壁垒(TBT)委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认标准化原则制定的。
1.1
This specification covers corrugated steel structural plate, polymer-coated, used in the construction of pipe, pipe-arches, arches, underpasses, and special shapes for field assembly. Appropriate fasteners and accessory materials are also described. The pipe, arches, and other shapes are generally used for drainage purposes, pedestrian and vehicular underpasses, and utility tunnels.
1.2
This specification does not include requirements for bedding, backfill, or the relationship between earth cover load and plate thickness of the pipe. Experience has shown that the successful performance of this product depends upon the proper selection of plate thickness, type of bedding and backfill, manufacture in the plant, and care in the installation. The purchaser must correlate the preceding factors and also the corrosion and abrasion requirements of the field installation with the plate thickness. The structural design of corrugated steel structural plate pipe and the proper installation procedures are described in Practices
A796/A796M
and
A807/A807M
.
1.3
Units—
This specification is applicable to orders in either inch-pound units (as A1113) or SI units (as A1113M). Inch-pound units and SI units are not necessarily equivalent. SI units are shown in brackets in the text, but they are the applicable values when the material is ordered to A1113M.
1.4
This specification references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of this specification.
1.5
This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.6
This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.