首页 馆藏资源 标准快讯 标准数字化 呈缴征集 标准服务 关于我们
历史 ASTM A896/A896M-09(2019)
到馆提醒
收藏跟踪
购买正版
Standard Practice for Conducting Case Studies on Galvanized Structures 对镀锌结构进行案例研究的标准实施规程
发布日期: 2019-05-01
1.1 本规程规定了镀锌装置案例研究的程序。其用于结构构件和装置的其他永久零件,如栏杆和其他此类制造。 1.2 本规程包括镀锌结构目视检查、涂层厚度测量和结果报告的建议。 1.3 本规范适用于以英寸-磅为单位的订单(如 A896 )或使用国际单位制(如 A896M ). 英寸-磅单位和国际单位不一定完全等同。在本规范文本中,如适用,国际单位制显示在括号中。每个系统应相互独立使用,不得以任何方式组合数值。 1.4 本标准并非旨在解决与其使用相关的所有安全问题(如有)。本标准的用户有责任在使用前制定适当的安全、健康和环境实践,并确定监管限制的适用性。 1.5 本国际标准是根据世界贸易组织技术性贸易壁垒(TBT)委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认标准化原则制定的。 ====意义和用途====== 3.1 本规程适用于暴露在大气或工厂环境中的镀锌结构,包括建筑物、桥梁和工业厂房建筑。 3.2 它提供了数据收集,以记录镀锌层提供的保护。 3.3 进行涂层厚度测量的方法A主要旨在通过对结构的几个构件进行厚度测量,在检查时评估镀锌结构的一般状况。 3.4 方法B提供了对结构上特定位置的涂层厚度随时间变化的精确监测,以评估环境的腐蚀性、方向、标高或其他因素的影响。 3.5 方法B不是方法A的替代程序,而是补充和可选的。
1.1 This practice sets forth the procedures for conducting case studies of galvanized installations. It is intended for structural members and other permanent parts of the installation, such as railings and other such fabrications. 1.2 Included in this practice are recommendations for the visual inspection of the galvanized structure, measurement of coating thickness, and reporting of results. 1.3 This specification is applicable to orders in either inch-pound units (as A896 ) or in SI units (as A896M ). Inch-pound units and SI units are not necessarily exact equivalents. Within the text of this specification and where appropriate, SI units are shown in brackets. Each system shall be used independently of the other without combining values in any way. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ====== 3.1 This practice is applicable to galvanized structures exposed to the atmosphere or to plant environments, including buildings, bridges, and industrial plant constructions. 3.2 It provides for the collection of data to document the protection afforded by the galvanized coating. 3.3 Method A for conducting a coating thickness survey aims essentially at an assessment of the general condition of the galvanized structure, at the time of the inspection, by taking thickness measurements on several members of the structure. 3.4 Method B provides for accurate monitoring of the coating thickness decrease as a function of time, at specific locations on the structure, in order to assess the corrosivity of the environment, the effect of orientation, elevation, or other factors. 3.5 Method B is not an alternate procedure to Method A, but is complementary and optional.
分类信息
关联关系
研制信息
归口单位: A05.13
相似标准/计划/法规