Standard Specification for Hot Tin and Hot Tin/Lead Dip on Ferrous and Non-Ferrous Metals
有色金属和有色金属的热锡和热锡/铅浸渍标准规范
1.1
本规范涵盖了通过热浸工艺在黑色金属和有色金属上应用的锡和锡/铅涂层。热锡和锡/铅涂层用于提供低接触电阻表面,防止腐蚀,促进焊接,提供抗磨损性能,并作为高强度钢氮化中的终止涂层。
1.2
本规范旨在适用于回流、离心或以其他方式处理以去除过量锡或锡/铅浴金属的物品。涂层厚度等级要求反映了这一点。
1.3
暴露在室外的锡或锡/铅涂层可能会产生一些腐蚀。在正常的室内暴露中,锡或锡/铅对铁、钢、镍、铜及其合金具有保护作用。由于锡或锡/铅与底层金属之间通过不连续性形成的电偶,尤其是在潮湿气氛中,可以预期在涂层的不连续性(例如孔隙)处发生腐蚀。1.4
本规范不适用于锡或锡/铅的电沉积涂层。
1.5
以SI单位表示的值应被视为标准。括号中给出的值仅供参考。
1.6
本标准并不旨在解决与其使用相关的所有安全性问题(如果有)。本标准的使用者有责任在使用前建立适当的安全、健康和环境实践并确定法规限制的适用性。
1.7
本国际标准是根据世界贸易组织技术性贸易壁垒(TBT)委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认的标准化原则制定的。
1.1
This specification covers tin and tin/lead coatings applied by the hot dip process on ferrous and non-ferrous metals. Hot tin and tin/lead coatings are used to provide a low contact-resistance surface, to protect against corrosion, to facilitate soldering, to provide anti-galling properties, and to be a stop-off coating in the nitriding of high-strength steels.
1.2
This specification is intended to be applicable to items that are reflowed, centrifuged or otherwise handled to remove excess tin or tin/lead bath metal. Coating thickness grade requirements reflect this.
1.3
Some corrosion can be expected from tin or tin/lead coatings exposed outdoors. In normal indoor exposure, tin or tin/lead is protective on iron, steel, nickel, copper, and their alloys. Corrosion can be expected at discontinuities in the coating (such as pores) due to galvanic couples formed between the tin or the tin/lead and the underlying metal through the discontinuities, especially in humid atmospheres.
1.4
This specification does not apply to electrodeposited coatings of tin or tin/lead.
1.5
The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.
1.6
This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.7
This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.