历史
ASTM A1074-11(2015)
到馆提醒
收藏跟踪
分享链接
购买正版
选择购买版本
本服务由中国标准服务网提供
电子版
英语/个人电子版/1-2个工作日发邮件/有水印
¥ 774
更多
前往中国标准服务网获取更多购买信息
支持批量购买纸质版标准
Standard Specification for Hot Tin and Hot Tin/Lead Dip on Ferrous and Non-Ferrous Metals
有色金属和有色金属的热锡和热锡/铅浸渍标准规范
1.1
本规范涵盖通过热浸工艺在黑色金属和有色金属上涂覆的锡和锡/铅涂层。热锡和锡/铅涂层用于提供低接触电阻表面,防止腐蚀,促进焊接,提供抗磨损性能,并在高强度钢的渗氮中作为阻挡涂层。
1.2
本规范适用于回流、离心或以其他方式处理以去除多余锡或锡/铅槽金属的物品。涂层厚度等级要求反映了这一点。
1.3
暴露在室外的锡或锡/铅涂层可能会产生一些腐蚀。
在正常的室内暴露中,锡或锡/铅对铁、钢、镍、铜及其合金具有保护作用。由于锡或锡/铅与底层金属之间通过不连续处形成的电偶,尤其是在潮湿环境中,涂层中的不连续处(如孔隙)可能会发生腐蚀。
1.4
本规范适用于不低于99.8的热浸锡涂层 % 60±5的锡和热锡/铅浸镀层 % 锡和天平铅。
1.5
本规范不适用于锡或锡/铅的电沉积涂层。
1.6
以国际单位制表示的数值应视为标准。
括号中给出的值仅供参考。
1.7
本标准并非旨在解决与其使用相关的所有安全问题(如有)。本标准的用户有责任在使用前制定适当的安全和健康实践,并确定监管限制的适用性。
1.1
This specification covers tin and tin/lead coatings applied by the hot dip process on ferrous and non-ferrous metals. hot tin and tin/lead coatings are used to provide a low contact-resistance surface, to protect against corrosion, to facilitate soldering, to provide anti-galling properties, and to be a stop-off coating in the nitriding of high-strength steels.
1.2
This specification is intended to be applicable to items that are reflowed, centrifuged or otherwise handled to remove excess tin or tin/lead bath metal. Coating thickness grade requirements reflect this.
1.3
Some corrosion can be expected from tin or tin/lead coatings exposed outdoors. In normal indoor exposure, tin or tin/lead is protective on iron, steel, nickel, copper, and their alloys. Corrosion can be expected at discontinuities in the coating (such as pores) due to galvanic couples formed between the tin or the tin/lead and the underlying metal through the discontinuities, especially in humid atmospheres.
1.4
This specification applies to hot tin dip coatings of not less than 99.8 % tin and to hot tin/lead dip coatings of 60 ± 5 % tin and the balance lead.
1.5
This specification does not apply to electrodeposited coatings of tin or tin/lead.
1.6
The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.
1.7
This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.