首页 馆藏资源 标准快讯 标准数字化 呈缴征集 标准服务 关于我们
历史 ASTM A1072/A1072M-11(2015)
到馆提醒
收藏跟踪
购买正版
Standard Specification for Zinc-5 % Aluminum (Hot-Dip) Coatings on Iron and Steel Products 锌-5 ;%的标准规范钢铁产品上的铝(热浸)涂层
发布日期: 2015-10-01
1.1 本规范涵盖了锌-5的要求 % 通过热浸工艺对钢铁产品进行铝涂层。涂层还可能包含除锌和铝之外的少量元素,这些元素旨在改善涂层产品的加工和特性。这些金属涂层包括锌-5 %-铝(Zn-5Al)、锌-5 %-混合稀土铝(Zn-5Al-MM)和锌-5 %-铝镁(Zn-%Al-Mg)。 1.2 本规范涵盖未制造产品和制造产品,例如,组装钢产品、结构钢制造、热浸镀锌前已弯曲或焊接的大管,以及由未涂覆钢丝制成的线材。本规范还涵盖了在热浸镀锌之前制造成零件的钢锻件和铸铁件,或尺寸太大而无法离心(或以其他方式处理以去除多余熔池金属)的钢锻件和铸铁件。 1.3 本规范涵盖了装配式钢筋组件。 1.4 本规范适用于以英寸-磅为单位的订单(如 A1072 )或国际单位制(如 A1072M ). 英寸-磅单位和国际单位不一定完全等同。在本规范文本中,在适当的情况下,国际单位制显示在括号中。每个系统应相互独立使用,不得以任何方式组合数值。如果订单采用国际单位制,则所有测试和检验均应使用与测试或检验方法等效的公制单位(视情况而定)。如果订单采用国际单位制,则应在下订单时向热浸镀膜机说明。
1.1 This specification covers the requirements for zinc-5 % aluminum coated, by the hot-dip process on iron and steel products. The coating may also contain small amounts of elements other than zinc and aluminum that are intended to improve processing and the characteristics of the coated product. These metallic coatings include zinc- 5 %-aluminum (Zn-5Al), zinc-5 %-aluminum-mischmetal (Zn-5Al-MM) and zinc-5 %-aluminum-magnesium (Zn- %Al-Mg). 1.2 This specification covers both un-fabricated products and fabricated products, for example, assembled steel products, structural steel fabrications, large tubes already bent or welded before hot-dip coating, and wire work fabricated from uncoated steel wire. This specification, also, covers steel forgings and iron castings incorporated into pieces fabricated, before hot-dip coating or which are too large to be centrifuged (or otherwise handled to remove excess molten bath metal). 1.3 Fabricated reinforcing steel bar assemblies are covered by the present specification. 1.4 This specification is applicable to orders in either inch-pound units (as A1072 ) or SI units (as A1072M ). Inch-pound units and SI units are not necessarily exact equivalents. Within the text of this specification and where appropriate, SI units are shown in parentheses. Each system shall be used independently of the other without combining values in any way. In the case of orders in SI units, all testing and inspection shall be done using the metric equivalent of the test or inspection method as appropriate. In the case of orders in SI units, such shall be stated to the hot-dip coater when the order is placed.
分类信息
关联关系
研制信息
归口单位: A05.13
相似标准/计划/法规
现行
ASTM A1072/A1072M-25
Standard Specification for Zinc-5 % Aluminum (Hot-Dip) Coatings on Iron and Steel Products
钢铁产品上锌-5%铝(热浸)涂层的标准规范
2025-04-01
现行
ASTM A875/A875M-25a
Standard Specification for Steel Sheet, Zinc-5 % Aluminum Alloy-Coated by the Hot-Dip Process
锌-5薄钢板标准规范 % 热浸镀铝合金
2025-12-01
现行
ASTM B750-22
Standard Specification for GALFAN (Zinc-5 % Aluminum-Mischmetal) Alloy in Ingot Form for Hot-Dip Coatings
GALFAN(锌-5)的标准规范 % 热浸镀用铸锭状铝(混合稀土)合金
2022-04-01
现行
ASTM B997-26
Standard Specification for Zinc-Aluminum Alloys in Ingot Form for Hot-Dip Coatings
热浸镀用铸锭状锌铝合金的标准规范
2026-04-01
现行
ASTM A792/A792M-25a
Standard Specification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process
钢板标准规范 55 % 热浸镀铝锌合金
2025-12-01
现行
ASTM A1046/A1046M-25a
Standard Specification for Steel Sheet, Zinc-Aluminum-Magnesium Alloy-Coated by the Hot-Dip Process
热浸镀锌铝镁合金钢板的标准规范
2025-12-01
现行
ASTM A153/A153M-23
Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware
钢铁五金件镀锌层(热浸镀锌)标准规范
2023-04-01
现行
ASTM B1022-26
Standard Specification for Zinc-Aluminum-Magnesium Alloys in Ingot Form for Coating Steel Sheet by the Hot-Dip Process
用热浸法涂覆薄钢板用铸锭状锌铝镁合金的标准规范
2026-09-01
现行
ASTM A463/A463M-25b
Standard Specification for Steel Sheet, Aluminum-Coated, by the Hot-Dip Process
热浸法镀铝钢板标准规范
2025-12-01
现行
ASTM A123/A123M-24
Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products
钢铁产品锌(热浸镀锌)涂层标准规范
2024-05-01
现行
YB/T 4574-2016
高强度低松弛预应力热镀锌-5%铝-稀土合金镀层钢绞线
High strength low relaxation hot-dip zinc-5% aluminum-mischmetal alloy-coated steel strand for prestress
2016-10-22
现行
ASTM A653/A653M-25a
Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
热浸法镀锌(镀锌)或锌铁合金镀层(电镀)的钢板标准规范
2025-12-01
现行
ASTM A53/A53M-24
Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless
焊接和无缝镀锌黑钢管
2024-03-01
现行
ASTM F1083-18(2026)
Standard Specification for Pipe, Steel, Hot-Dipped Zinc-Coated (Galvanized) Welded, for Fence Structures
围栏结构用热浸镀锌(镀锌)焊接钢管标准规范
2026-10-01
现行
ASTM A1063/A1063M-25
Standard Specification for Steel Sheet, Twin-Roll Cast, Zinc-Coated (Galvanized) by the Hot-Dip Process
钢板 双辊铸造 镀锌(镀锌)热浸工艺的标准规范
2025-12-01
现行
DL/T 2312-2021
输变电工程钢构件热浸镀锌铝镁稀土合金镀层技术条件
Specification of hot dip zinc-aluminum-magnesium rare-earth alloy coatings on steel structure of power transmission and distribution project
2021-04-26
现行
AASHTO M 232M/M 232-19(2023)
Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware (ASTM Designation: A153/A153M-16a)
钢铁五金件镀锌层(热浸)标准规范(ASTM名称:A 153/A 153M-16a)
现行
ASTM A855/A855M-03(2026)
Standard Specification for Zinc-5 % Aluminum-Mischmetal Alloy-Coated Steel Wire Strand
锌-5%铝合金涂层钢绞线的标准规范
2026-10-01
现行
ASTM A856/A856M-03(2026)
Standard Specification for Zinc-5 % Aluminum-Mischmetal Alloy-Coated Carbon Steel Wire
锌-5%铝混合稀土合金涂层碳钢丝的标准规范
2026-10-01
现行
ASTM A1057/A1057M-25
Standard Specification for Steel, Structural Tubing, Cold Formed, Welded, Carbon, Zinc-Coated (Galvanized) by the Hot-Dip Process
热浸镀锌碳素冷成型焊接结构管标准规范
2025-12-01